TABLE 1004.2.1 SPACES WITH ONE MEANS OF EGRESS OCCUPANCY MAXIMUM OCCUPANT LOAD A,B,E,F,M,U 50 H-1,H-2,H-3 3 H-4,H-5,...
Search Results "Enhanced 9-1-1"
-
1004.2.1 Exit or exit access doorways required
-
Availability of the CRO
[Secs. 382.65(a)(1) and (2)] The CRO may be made available in person or by telephone. If the CRO is made available by telephone, it must be at no cost to the passenger....
-
1134A.5, Item 5
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or 1/4 inch (6.35 mm) when laminated, and shall pass the test requirements of...
-
New Construction. (Section-by-Section Analysis)
The Department has decided to create a new section, § 35.151(k)(1), which clarifies that new construction of jails, prisons, and other detention facilities shall comply with the requirements...
-
1134A.5, Item 5
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or 1/4 inch (6.35 mm) when laminated, and shall pass the test requirements of...
-
11B-233.3.1.2.6 Public housing facility site impracticality
The number of adaptable residential dwelling units required in non-elevator building public housing facilities shall be determined in accordance with Chapter 11A, Section 1150A.1....
-
304.2 Floor or Ground Surfaces
EXCEPTION: Slopes not steeper than 1:48 shall be permitted. Advisory 304.2 Floor or Ground Surface Exception....
-
General: ADA Standard Section 210.1
Section 210.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for stairways.
-
Shopping Center/Mall
[36.401(d)(1)(ii)] (A) A building housing five or more sales or rental establishments; or (B) A series of buildings on a common site, either under common ownership or common control...
-
General: ADA Standard Section 407.1
Section 407.1 of the ADA Standards covers information in the current ADA Standards for elevators.
-
F. Availability of Materials Incorporated by Reference
See 1 CFR part 51....
-
Questionnaire on Two Step Transfers
There were 9 participants in total who had a failed attempt on any of the transfers in protocols D and E....
-
3.4 Disability/Accessibility Organizations.
These organizations have information about the latest technological innovations that will improve accessibility. 1....
-
D. LAY WITNESS TESTIMONY
RT 1389:8-9. She suffers from cerebral palsy and uses a motorized wheel chair for mobility and to travel around San Francisco. RT 1380:12-1381:3. 130....
-
20. When an employee requests leave as a reasonable accommodation, may an employer provide an accommodation that requires him/her to remain on the job instead?
. § 825.702(d)(1) (1997). 57. See Question 9, supra....
-
Attitudes
We are aware that our attitudes toward participants with disabilities can: B.1....
-
P. MAINTENANCE OF ACCESSIBLE FEATURES AND TRAINING
Within nine (9) months of the entry of this Consent Decree, the County will submit for pre-approval by the United States a proposed training program, lasting at least four hours, on the...
-
What barriers will it be "readily achievable" to remove?
The Department's regulation contains a list of 21 examples of modifications that may be readily achievable: 1) Installing ramps; 2) Making curb cuts in sidewalks and entrances;...
-
P. MAINTENANCE OF ACCESSIBLE FEATURES AND TRAINING
Within nine (9) months of the entry of this Consent Decree, the County will submit for pre-approval by the United States a proposed training program, lasting at least four hours, on the...
-
11B-205.1 General
Exceptions: 1. Operable parts that are intended for use only by service or maintenance personnel shall not be required to comply with Section 11B-309. 2....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
802.1.1 Floor or Ground Surface
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....