In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
Search Results "Patient in Side-Lying Position"
-
804.2.1 Pass Through Kitchen
-
404.2.5 Thresholds
EXCEPTION: Existing or altered thresholds 3/4 inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required to comply with 404.2.5...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
610.3.1 Rectangular Seats
The side edge of the seat shall be 1½ inches (38 mm) maximum from the adjacent wall. Figure 610.3.1 Rectangular Shower Seat...
-
Discussion
That’s from having just a bright light that’s in the line of sight – even if you’re not looking right at it, it’s off to the side – if it’s visible, the light is getting in through the pupil...
-
Stabila slope meter is easy to read
I like this slope meter because of the readings provided on the top and the side of the slope meter. Makes documentation with photos very easy in the field....
- Bobrick B-3091 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
- Bobrick B-3092 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
4.1.3(17)(a)
Unless otherwise specified, accessible telephones may be either forward or side reach telephones. 2 A bank consists of two or more adjacent public telephones, often installed as a unit...
-
Accessible Round Table Style
Side aisles require at least six feet between the table and the side wall or other obstructions....
-
1124B
The minimum clear floor or ground space for wheelchairs may be positioned for forward or parallel approach to an object....
-
FIGURE INDEX
Figure 303.2 Vertical Change in Level Figure 303.3 Beveled Change in Level Figure 304.3.2 T-Shaped Turning Space Figure 305.3 Clear Floor or Ground Space Figure 305.5 Position...
-
Guest Rooms
At least on sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
- SafePath EntryLevel™ Landings
- LowVis Guide: Indoor Navigation for the Visually Impaired
-
Comfort animals vs. psychiatric service animals.
The Department is proposing new regulatory text in § 36.104 to formalize its position on emotional support/comfort animals, which is that "[a]nimals whose sole function is to provide emotional...
-
Examples of alternative ways to serve a customer when barrier removal is not feasible are:
Examples of alternative ways to serve a customer when barrier removal is not feasible are: At a dry cleaner's, providing curb-side service for a customer dropping off or picking up...
-
Alternate Roll-in Showers
The revised language clarifies the location of the entry at the end of the long side of the compartment (608.2.3)....
-
10. Can a transfer platform be an irregular shape as long as it incorporates the minimum rectangle of 14 by 24 inches?
The 24 inch side of the transfer platform must be free from obstructions to allow a person to transfer....
-
Clear Floor Space
Designers may decide which location is best suited for transfer on a particular ride.Because people transfer in different ways, providing additional space both in front of and to the side...
-
T704.3.2 Automated Route Identification Announcements
Signs displaying route identification information shall be provided on the front and boarding sides of non-rail vehicles. Signs shall comply with T702....
-
3. Protruding Objects
Is the voting area free of objects that protrude from the side more than 4 inches into the route with the bottom of the object more than 27 inches above the floor?...
-
4.10.12(3)
All floor buttons shall be no higher than 54 in (1370 mm) above the finish floor for side approach and 48 in (1220 mm) for front approach....
-
Reach Ranges and Operable Parts
REACH RANGES AND OPERABLE PARTS Forward and side reach 11B-308.2/3 Over projections 11B-308.2.2/3.2...