Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-609.4 Position of grab bars
-
Q: Does Title II require that telephone emergency service systems be compatible with all codes used for TTY communications?
Until it can be technically proven that communications in another format can operate in a reliable and compatible manner in a given telephone emergency environment, a State or local government...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
11B-606.6 Adjacent side wall or partition
See the foregoing ETA Editor's Note at 11B-212.3 regarding the difficulties of distinguishing fixture types and the applicable technical requirements....
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
Outdoor Recreation Access Routes at Trailheads [F247.3.2]
Accessible parking spaces or other arrival points The starting point of the trail Accessible elements, spaces, and facilities within the trailhead The technical...
-
§ 35.150(b)(2)(i) Safe harbor
Elements that have not been altered in existing facilities on or after March 15, 2012 and that comply with the corresponding technical and scoping specifications for those elements in either...
-
11B-606.6 Adjacent side wall or partition
See the foregoing ETA Editor's Note at 11B-212.3 regarding the difficulties of distinguishing fixture types and the applicable technical requirements....
-
Decorative images
This will remove the need for alternative text altogether and will remove the image from the semantic and structural flow of the page....
-
Administrative Requirements
Develop a transition plan if structural changes are necessary for achieving program accessibility....
-
502.3.2 Row, Column, and Headers (Section-by-Section Analysis)
See W3C, Understanding SC 1.3.1, Understanding WCAG 2.0 (Sept. 16, 2014), http://www.w3.org/TR/UNDERSTANDING-WCAG20/content-structure-separation-programmatic.html....
-
Adaptability
This allows structural reinforcement or blocking for later installation of grab bars and removable base cabinetry below lavatories....
-
Transit Facility
The point of the definition is to exempt from TDD requirements open structures, like bus shelters, or facilities which are not used primarily as transportation stops or terminals....
-
II-5.6000 Time periods for achieving program accessibility
If structural changes are needed to achieve program accessibility, they must be made as expeditiously as possible, but in no event later than January 26, 1995....
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
Grab Bars: ADA Standard Section 1009.4.5
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
11B-812.7.2 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
907.4.2.2 Height
The maximum effort to activate controls shall be no greater than 5 pounds-force. ◼...
-
11B-812.7.2 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center....
-
907.4.2.2 Height
The maximum effort to activate controls shall be no greater than 5 pounds-force. ◼...
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....