Fine additives are commonly used in smooth coatings to provide subtle traction, while coarse additives are ideal for high-traffic or wet areas where maximum slip resistance is required....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
Anti-Slip Additives: Enhancing Safety and Performance in Surfaces
-
T103 Definitions
To the extent transit agencies are concerned that deletion of this definition in the Access Board’s transportation vehicle guidelines will mean they can no longer determine what size wheelchairs...
-
Official Definitions
But then the technical definition of blindness is usually defined in terms of some level of visual impairment and it’s usually even visual acuity or visual fields....
-
BTX Intelligent Fashion Tumo Drapery System Installation Video
With unsurpassed technical assistance to guide system selection and installation, as well as the largest range of tailor-fit applications, BTX offers the systems and services you need. ...
-
Knee & Toe Space [M303.2.4]
The subcommittee reviewed the existing data of wheelchair users1 and industry input on how these elements technically affect one another....
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
Kawneer North America 1010C Sliding Mall Front
Friction reducing slide buttons at the head of each vertical stile Companion fixed lights Narrow stile 190 egress doors Factory fabricated, shipped knocked-down for local assembly Structurally...
-
Landscape Forms Inc. FGP Bench Collection
The subtly concave curvature of the cast aluminum structural frames gives it a soft appearance....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
703.2.6 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 15 percent maximum of the height of the character....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
410.4 Platform to Runway Clearance
The clearance between the platform sill and the edge of any runway landing shall be 1 inch (32 mm) maximum....
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1-½ inch (38 mm) maximum....
-
703.5.7 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
703.5.7 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
