(1) The sink and surrounding counter shall be mounted at a maximum height of 34 in (865 mm) above the floor, measured from the floor to the top of the counter surface, or shall be adjustable...
Search Results "Work Surface"
-
4.34.6.5(1)
-
11B-705.3 Product Approval
Only approved DSA-AC detectable warning products and directional surfaces shall be installed as provided in the California Code of Regulations (CCR), Title 24, Part 1, Chapter 5, Articles...
-
11B-407.4.10 Support rail
Support rails in elevator cabs are used in a different way than handrails along a walking surface such as a ramp or stairway....
-
DETECTABLE WARNING
A standardized surface feature built in or applied to walking surfaces or other elements to warn persons with visual impairments of hazards on a circulation path....
-
Tread Width
The visible trail surface measured perpendicular to the direction of travel....
-
F - number system
The flatness number also gives an indication of the "bumpiness" of the surface. The F - number system develops two number ratings, the FF and the FL....
-
New Accessible Handpump for Campgrounds
National and regional accessibility coordinators have been working with the Forest Service Technology and Development pro- gram to identify accommodation needs....
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
1630.2(j)(3)(I)
The inability to perform a single, particular job does not constitute a substantial limitation in the major life activity of working....
-
Party-Driven
Parties work together, and there is room to negotiate the terms of the agreement and the timeline for implementation....
-
R201.2 Temporary and Permanent Facilities
Temporary pedestrian circulation paths around work zones and portable public toilets are examples of temporary facilities in the public right-of-way that are covered by the requirements...
-
On existing locations when we add an EV station as van accessible how do we address taking two spaces from the facility (losing a space) and then not having the mandatory spaces remaining for the facility?
RESPONSE: All work is required to comply with the applicable codes, standards and ordinances. Parking ordinances are typically adopted within each city and county in California....
-
How can we address locations that do not have excess parking spaces and currently, cannot pass through plan check because the code says it’s now a “charging space” not a “parking space”? With the current requirements, you need more Van Accessible and ADA reserved parking spaces than required under code with the combination of EV charging and standard spaces. It puts an impossible burden on small parking lots in Irvine and San Diego which are strictly enforcing the interpretation of charging spaces.
RESPONSE: All work is required to comply with the applicable codes, standards and ordinances. Parking ordinances are typically adopted within each city and county in California....
-
We are also being asked to show the future space for the 1 Van accessible EV space that would be required in the future, if the equipment was installed. And due to the requirement for the access aisle beside this space, in the future it would be converted to an access aisle resulting in the loss of one parking space. As this project is right at the required number of parking spaces per zoning, it is not acceptable to the zoning reviewer to sign off on a plan that shows a “future access aisle for future EV van accessible charging space,” as they are approving the loss of a parking space, even though this would not happen until a future condition, upon which I assume there would be some review process for installation of EV charging equipment. What is the appropriate path forward in this situation?
RESPONSE: All work is required to comply with the applicable codes, standards and ordinances. Parking ordinances are typically adopted within each city and county in California....
-
Trip-by-Trip Eligibility
This individual is able to navigate the system for work purposes and therefore would not be eligible for paratransit for work trips....
-
Service Animals
The work or tasks performed by a service animal must be directly related to the individual's disability....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
382.71 What other aircraft accessibility requirements apply to carriers?
This provision, like its counterpart in the existing rule, requires maintenance of accessibility features in proper working order and tells carriers to ensure that any replacement or refurbishing...