The 2010 Standards also include revisions to technical or scoping specifications for certain elements that were addressed in the 1991 Standards, i.e., elements for which there already were...
Search Results "Non-Fixed Element"
-
Section 36.304 Removal of Barriers (Section-by-Section Analysis)
-
Outdoor Recreation Access Routes in Viewing Areas [F246.4]
At viewing areas not located along trails, at least one ORAR must connect accessible parking spaces or other arrival points that serve the viewing area with accessible elements, spaces,...
-
R405.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear space, the knee clearance shall be 280 mm (11 in) deep minimum at 230 mm (9 in) above the finish surface, and 205 mm...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
For this reason, barriers significantly higher than a curb or riser, such as a guardrail, planter box, bench, parapet wall, or similar elements are recommended....
-
Clearances [§403.5]
The minimum clearance cannot be reduced by any elements, including handrails or protruding objects....
-
C. Developing an Action Plan For Providing Accessible Websites
The next steps are to develop an action plan to fix web content that is currently inaccessible and implement procedures to ensure that all new and modified web content is accessible....
-
602.1 General (Section-by-Section Analysis)
requirements in the accompanying subsections concerning identification of accessibility and compatibility features (602.2), electronic support documentation (602.3), and alternate formats for non-electronic...
-
Section 36.303(g)(1) Open Movie Captioning
The final rule defines “open movie captioning” as “the written on-screen display of a movie's dialogue and non-speech information, such as music, the identity of the character who is speaking...
-
11B-233.3.1.2.5 Public housing facility site impracticality
The number of adaptable residential dwelling units required in non-elevator building public housing facilities shall be determined in accordance with Chapter 11A, Section 1150A.1....
-
Grab Bars
The diameter of the grab bars must comply with ADAAG (diameter between 1.25 and 1.5 inches, not abrasive, and non-rotating)....
-
Starting Your Plan with Preparedness
There is plenty to do during non-emergency times to make sure your community is prepared. With this section you will start developing your community’s emergency plan....
-
Signs
,” (Standards) § 4.1.3(16)(a): Raised and Braille letters or numbers (Standards § 4.30.4); Mounting location (§ 4.30.6); Color contrast (§ 4.30.5); and Non-glare...
-
Angled Van Spaces
Recommendation: Where standard (non-van) accessible spaces are angled or otherwise restrict entry to one direction only, providing one access aisle for each accessible space (or on both...
-
68.73. Registration Requirements--Renewal
(b) Non-receipt of a registration renewal notice from the department does not exempt a person from any requirements of this chapter....
-
D. Suites:
these suites later be marketed or sold to the public on a season basis, PSE shall make the suites (including the toilet rooms) accessible in compliance with the 2010 Standards, as they are non-complying...
-
Error/Omission: The built-up curb ramp projects into the access aisle.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
11B-233.3.1.2.6 Public housing facility site impracticality
The number of adaptable residential dwelling units required in non-elevator building public housing facilities shall be determined in accordance with Chapter 11A, Section 1150A.1....
-
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems
The requirements and standards are the same as those specified for non-rail vehicles in §37.73....
-
[A] BUILDING
Rather, these elements are generally considered to be facilities. See the definition of FACILITY....
-
Sections 4.2 Through 4.35 (Preamble, Section-by-Section Analysis)
• Sections 4.2 Through 4.35 Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be accessible by the scoping provisions (sections 4.1 through...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...