analyzed in Table 1 include: drinking fountains, public toilet facilities, tables, counters, passenger loading zones, ramps, stairways, handrails, doors, doorways, gates, operable parts, clear...
Search Results "Clear Width"
-
Table 1
-
A4.28.2 Audible Alarms
Select a signal which has a sound characterized by three or four clear tones without a great deal of “noise” in between....
-
Room Dimensions
For single-user toilet rooms, key considerations include the configuration of water closets and lavatories, clear floor spaces required at fixtures, turning space, the location and swing...
-
Section 36.202 Activities (Section-By-Section Analysis and Response to Comments)
Section 36.213 makes clear that the limitations on the ADA's requirements contained in subpart C, such as "necessity'' (Sec.36.301(a)) and "safety'' (Sec.36.301(b)), are applicable to the...
-
11B-707.3 Operable parts
Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation....
-
Wheelchair Spaces (M303.2)
M303.2 includes technical criteria for orientation, width, depth, and knee and toe clearance at wheelchair spaces....
- Tork Elevation® Liquid Soap Dispenser, Black
- SuperDeck Beach Boardwalk
- Tork Xpress® Multifold Hand Towel Dispenser, Stainless Steel
- Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
- Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
- SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
- Hussey Seating Company Roll-A-Way Seating
-
Curb Ramps at Marked Crossings and Vehicular Lanes
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3. ...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Recumbent Bicycles
Recumbents are generally longer and wider than upright bicycles, but they are available in many different shapes and sizes so length and operating width vary greatly....
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3....
-
4.4 Knee and Toe Clearances
620-640 X 500-650 Reduction Angle 1:6 X X X Width...
-
Character Specifications
Some comments recommended a spacing range that was at least as wide as the stroke thickness and no more than four times this width. Response....
-
T302 Walking Surfaces
To address this concern, an exception has been added to the final rule that allows a larger opening (7/8 inch width maximum) for wheelchair securement system components affixed to walking...
-
Polypavement
Upon drying up, the surface remained cracked and was heaving along the full width of the trail....