See Chapter 11B, Figure 11B-703.7.2.1.◼...
Search Results "Figures"
-
INTERNATIONAL SYMBOL OF ACCESSIBILITY
-
INTERNATIONAL SYMBOL OF ACCESSIBILITY
See Chapter 11B, Figure 11B-703.7.2.1. ◼...
-
802.1.2 Width
Figure 802.1.2 Width of Wheelchair Spaces in Assembly Areas...
-
1009.5.6 Size
Figure 1009.5.6 Size of Transfer Steps...
-
804.2.2 U-Shaped
Figure 804.2.2 U-Shaped Kitchens...
-
Re: 404.2.4.3 Recessed Doors and Gates
Notice that the text does not match the figure for a push approach door. This may be an error in the Standards, but since the text governs, it exceeds the illustrated requirement. ...
-
Tactile Design for Universal Access
Our main interest is to present spatial concepts and figures through non-visual or extra-visual means....
-
1009.2.2 Seat Location
Figure 1009.2.2 Pool Lift Seat Location...
-
Turning Space [1015.4]
A turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide by 24 inches long (figure 29) must be provided...
-
g-iii
of each accessible door (see ADA Standards § Fig. 25) and, on the pull side, is there at least 18 inches clear floor space beyond the latch side of the door (see space configurations in Figure...
-
10. Clear Floor Space
Is there clear floor space in each accessible guestroom bathroom where persons who use wheelchairs can turn around - either a 60" diameter circle or a "T"-turn area as shown in Figure 3...
-
11B-607.5 Controls
FIGURE 11B-607.5 BATHTUB CONTROL LOCATION...
-
4.21.2 SIZE AND CLEARANCES
Figure 35 Shower Size and Clearances...
-
1009.2.4 Seat Height
Figure 1009.2.4 Pool Lift Seat Height...
-
201.4 Scope of Coverage
Unless specifically stated otherwise, advisory notes, appendix notes and figures contained in the code explain or illustrate the requirements; they do not establish enforceable requirements...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars...
-
Showers
(The titles under the illustrations (figures) related to showers in the final Guidelines for Requirement 6 have been revised to make it clear that the figures are specifying only the different...
-
2.2.4 Maneuverability
The separation between walls was increased at increments of 50 mm (2 in.) if passage through the mock environment was not cleared without touching the walls (Figure 2‒4)....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...
-
11B-609.2.2 Non-circular cross section
FIGURE 11B-609.2.2 GRAB BAR NON-CIRCULAR CROSS SECTION...
-
11B-1009.2.2 Seat location
FIGURE 11B-1009.2.2 POOL LIFT SEAT LOCATION...
-
§ 36.406(b) Application of proposed standards
Unless specifically stated otherwise, advisory notes, appendix notes, and figures contained in the proposed standards explain or illustrate the requirements of the rule; they do not establish...
-
H7
room, is there an area where a person who uses a wheelchair or other mobility device can turn around - either at least 60-inch diameter circle or a “T”-shaped turn area as shown in the figures...
