Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
Search Results "Seat Width"
Filters
Commonly Searched Documents
-
Doors and Gates in Series [§404.2.6]
-
Doors and Gates Operated Only By Security Personnel [§404.1, Ex]
If automated, such doors or gates are required to comply only with provisions for clear width and thresholds, as well as applicable provisions of the referenced ANSI/BHMA Standards....
-
§ 38.23(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch in width....
-
11B-206.2.19 Pedestrian street crossings
The curb ramp (excluding any flared sides) or blended transition shall be contained wholly within the width of the pedestrian street crossing served....
-
Hoyer Heavy-Duty Power Lift with Optional Scale
Weight capacity - 700 lbs Product weight - 150 lbs Lifts patient from floor - Yes Max lifting range - 69" Minimum lifting range - 23.3" Base width...
-
Shower Compartments
The 1991 Standards require a seat to be provided adjacent to the opening; and require the controls to be located on the side adjacent to the seat....
-
What do I do if a passenger claims that he or she is allergic to someone else’s service animal?
passenger expresses discomfort or annoyance because of an allergic reaction to the presence of a service animal nearby, you can offer the uncomfortable passenger the opportunity to change to a seat...
-
Pilot Rock PQT3-4 Square Pedestal Table Using Aluminum
Specifications: Model PQT3-4 Picnic Tables have a 48" square top with 3 bench seats. Table offers 32" table height, 20" seat height (nominal dimensions)....
-
3.7 Louisville Tinseltown 19, 4400 Towne Center Drive, Louisville, Kentucky
- In Auditorium 14, the two (2) wheelchair spaces and two (2) companion seats in the front row shall be relocated to the third row....
-
Backrests
Backrests: The backrest design for platform 1, the first surface that participants transferred to from their WMD as seen in Table 2, was based on bench seat back supports in section 903.5...
-
Registration Table
Place handouts at the front edge of the table to make them easier to reach for participants both seated and standing....
-
§382.83(a)(1)(iii)
not make a request at least 24 hours before the scheduled departure of the flight, you must meet the passenger's request to the extent practicable, but you are not required to reassign a seat...
-
§382.83(a)(1)(ii)
(ii) At any time up until 24 hours before the scheduled departure of the flight, you must assign a seat meeting the requirements of this section to a passenger with a disability meeting...
-
§382.83(a)(2)(iv)
check in at least an hour before the standard check-in time for the general public, you must meet the individual's request to the extent practicable, but you are not required to reassign a seat...
-
AMUSEMENT ATTRACTION
Amusement attractions include, but are not limited to, fun houses, barrels, and other attractions without seats....
-
GRAB BAR
A grab bar may also provide support for a user transferring from a wheelchair onto a bench, seat or plumbing fixture.◼...
-
GRAB BAR
A grab bar may also provide support for a user transferring from a wheelchair onto a bench, seat or plumbing fixture. ◼...
-
Toilet Buildings and Pit Toilets
If the pit toilet has a riser and toilet seat, ensure that the total height of that seat and the riser it rests on is 17 to 19 inches (430 to 485 millimeters) above the ground or floor....
-
Pilot Rock UT and UTH Series End Accessible Picnic Table Using Recycled Plastic
Model UT End Access Picnic Tables offer 30” nom. table height (to top of table); 18” nom. seat height....
-
§382.85(a)(1)(i)
in §382.81(a) through (d) of this part makes a reservation more than 24 hours before the scheduled departure time of the flight, you are not required to offer the passenger one of the seats...
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
12162(a)(4)(A)(i)(III)
in a wheelchair), or space to store and fold a wheelchair is available in the dining car at the time such passenger wishes to eat (if such passenger wishes to transfer to a dining car seat...
