When the facilities are built or altered, they must comply with the ADA Standards, which have specific technical requirements for elements and spaces, such as accessible parking spaces,...
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
G) Parks and Recreation Programs
-
New Construction
The 2010 Standards set out the minimum accessibility requirements for newly constructed facilities. 2010 ADA Standards Basics Chapter 1: Application and Administration...
-
3.3.11 180-Degree Turn
The U.S. standard of 1525 mm (60 in.) accommodates just over 80% of the manual and powered wheelchair users, but less than 50% of the scooter users in our sample....
-
Sections 35.108(d)(1)(vi) and 36.105(d)(1)(vi)—‘‘Substantially Limits’’ Shall Be Interpreted To Require a Lesser Degree of Functional Limitation Than That Required Prior to the ADA Amendments Act
But, the interpretation and application of the term ‘‘substantially limits’’ for this assessment requires a lower degree of functional limitation than the standard applied prior to the ADA...
-
c. Estimated Number and Type of Small Entities in the Movie Exhibition Industry
of Small Entities in the Movie Exhibition Industry The Regulatory Flexibility Act defines a “small entity” as a small business (as defined by the Small Business Administration Size Standards...
-
Elevator Landings
In the final rule, this provision has been editorially revised to refer to elevator "landings," consistent with the ANSI A117.1‒2003 standard....
-
Signs Required at Waiting Lines to Amusement Rides
Section 216.12 of the 2010 Standards requires signs at entries to queues and waiting lines identifying type and location of access for the amusement ride....
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Accessible Means of Entry to Wading Pools
Sections 242.3 and 1009.3 of the 2010 Standards require that at least one sloped means of entry is required into the deepest part of each wading pool....
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
d. ii.
See Standards §§ 4.2.5 and 4.2.6....
-
T403.1 General
Lifts shall comply with T403 and the National Highway Traffic Safety Administration’s Federal Motor Vehicle Safety Standards (FMVSS) for public use lifts at 49 CFR 571.403 and 571.404....
-
§ 36.304(d)(4)(ii)
(ii) Where an existing swimming pool has less than 300 linear feet of swimming pool wall, it shall be exempt from the provisions of section 242.2 of the proposed standards; and...
-
412.8.3 Signal Compatibility
ICT shall support all commonly used cross-manufacturer non-proprietary standard TTY signal protocols where the system interoperates with the Public Switched Telephone Network (PSTN)....
-
702.2 Advanced Television Systems Committee (ATSC)
Copies of the referenced standard may be obtained from the Advanced Television Systems Committee, 1776 K Street NW, Suite 200, Washington, DC 20006–2304 (http://www.atsc.org)....
-
H25
[ADA Standards § 4.13.5] Yes No...
-
§ 35.150(b)(5)(ii)
(ii) Where an existing swimming pool has less than 300 linear feet of swimming pool wall, it shall be exempt from the provisions of section 242.2 of the proposed standards; and...
-
H11
[ADA Standards § 4.19.6] Yes No...
-
H23
[ADA Standards § 4.17.3] Yes No...
-
J4
[ADA Standards §§ 4.15.3 and 4.15.4] Yes No...
-
C1-c
[ADA Standards § 4.3.3] Yes No If No, does the accessible route narrow to 32 inches for no more than 2 feet?...
-
§ 36.406(e)(2)
Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in accordance with section 809.2 of the 2010 Standards...
-
§ 36.406(d)(1)
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
Maintenance
Routine or periodic repair of trails or trail segments to restore them to the standards to which they were originally designed and built. ...