Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
Search Results "Shall"
-
11B-607.2 Clearance
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
-
221 Assembly Areas
Wheelchair spaces shall be located in not less than 20 percent of all boxes provided. Wheelchair spaces shall comply with 802.1....
-
11B-411.2.1.2.5 Audio output
Audio output shall be recorded or digitized human speech, and shall be delivered through a loudspeaker....
-
11B-1009.4.5 Grab bars
At least one grab bar complying with Section 11B-609 shall be provided on the transfer wall....
-
11B-411.2.1.2.5 Audio output
Audio output shall be recorded or digitized human speech, and shall be delivered through a loudspeaker....
-
11B-411.2.1.2.3 Accessibility function button
The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication....
-
11B-1009.4.5 Grab bars
At least one grab bar complying with Section 11B-609 shall be provided on the transfer wall....
-
11B-605.4 Flush controls
Flush controls shall be hand operated or automatic....
-
4.34.5.4(2) Seat
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
-
1134A.2 Number of complying bathrooms
Toilet, bathing and shower facilities shall comply with Section 1134A.4. 2. Bathtubs shall comply with Section 1134A.5. 3. ...
-
1134A.2 Number of complying bathrooms
Toilet, bathing and shower facilities shall comply with Section 1134A.4. 2. Bathtubs shall comply with Section 1134A.5. 3. Showers shall comply with Section 1134A.6. 4....
-
F216.1 General
Signs shall be provided in accordance with F216 and shall comply with 703. EXCEPTIONS: 1....
-
216.1 General
Signs shall be provided in accordance with 216 and shall comply with 703. EXCEPTIONS: 1....
-
216.1 General
Signs shall be provided in accordance with 216 and shall comply with 703. EXCEPTIONS: 1....
-
4.10.3 Hall Call Buttons
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
4.10.3 HALL CALL BUTTONS
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
9.3.1 General
In sleeping rooms required to comply with this section, auxiliary visual alarms shall be provided and shall comply with 4.28.4....
-
11B-809.7 Accessible routes
An accessible route shall be provided complying with Section 11B-809.7....
-
Terms Defined in Referenced Standards: ADA Standard Section 106.2
Section 106.2 of the ADA Standards covers information on the definitions of terms that are defined in Referenced Standards.
-
Bus Boarding and Alighting Areas: ADA Standard Section 810.2
Bus boarding and alighting areas shall comply with 810.2. Advisory 810.2 Bus Boarding and Alighting Areas....
-
U-Shaped: ADA Standard Section 804.2.2
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
Single Occupant Structures: ADA Standard Section 203.6
Section 203.6 covers scoping requirements of general exceptions for single occupant structures in the most current ADA Standards.
-
Width and Length: ADA Standard Section 1002.4.4.1
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...