Toilet facilities required to be accessible by 4.1 shall comply with 4.22. Accessible toilet rooms shall be on an accessible route....
Search Results "Shall"
Filters
Commonly Searched Documents
-
4.22.1 MINIMUM NUMBER
-
4.15.4 CONTROLS
Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge....
-
4.23.2 DOORS
Doors to accessible bathrooms shall comply with 4.13. Doors shall not swing into the floor space required for any fixture....
-
11B-407.4.8.2.2 Signal level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator....
-
11B-408.4.6 Car controls
Elevator car controls shall comply with Section 11B-407.4.6. Control panels shall be centered on a side wall....
-
11B-219.1 General
Assistive listening systems shall be provided in accordance with Section 11B-219 and shall comply with Section 11B-706....
-
11B-219.1 General
Assistive listening systems shall be provided in accordance with Section 11B-219 and shall comply with Section 11B-706....
-
11B-407.4.8.2.2 Signal level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator....
-
11B-409.2 Call buttons
Call buttons shall be ¾ inch (19.1 mm) minimum in the smallest dimension and shall comply with Section 11B-309....
-
11B-408.4.6 Car controls
Elevator car controls shall comply with Section 11B-407.4.6. Control panels shall be centered on a side wall....
-
11B-703.5.3 Style
Characters shall be conventional in form. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms....
-
11B-703.2.3 Style
Characters shall be sans serif. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms....
-
§ 382.61 Training
(4) The carrier shall ensure that personnel required to receive training shall complete the training by the following times: (i) For crewmembers subject to training required under...
-
§ 382.47 Accommodations for persons with hearing impairments
scheduled air service, or charter service under section 401 of the Federal Aviation Act, and which makes available telephone reservation and information service available to the public shall...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
404.2.10 Door and Gate Surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other....
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, operable parts of controls and faucets shall be installed on the back wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum...
-
3. FIXTURES and HARDWARE
Coat hooks: “Accessible coat hooks provided within toilet compartments shall be located within the reach ranges specified above....
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
11B-707.5 Speech output
Machines shall be speech enabled....
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, operable parts of controls and faucets shall be installed on the back wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum...
-
11B-228.3.2 Minimum number
EVCS complying with Section 11B-812 shall be provided in accordance with Section 11B-228.3.2 for each combination of charging level and EV connector type integral to the EV charger....
-
1013.4 Raised character and braille exit signs
Tactile exit signs shall be required at the following locations: 1....
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....