Trench Depth: Min. 1 1/4″ ADA Compliant 1 1/4″ in track. ...
Search Results "Grade 1 Braille"
- Panda S.10 All Aluminum Lift & Slide System
-
PRIVATE BUILDING OR FACILITY
[DSA-AC] A place of public accommodation or a commercial building or facility subject to Chapter 1, Section 1.9.1.2. [2010 ADA Standards 106.5] Private Building or Facility....
-
11B-407.4.8.2.1 Signal type
Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
-
11B-107 Special conditions appeals action
See Chapter 1, Section 1.9.1.5. ETA Editor's Note A successful appeal does not warrant ADA compliance....
-
11B-107 Special conditions appeals action
See Chapter 1, Section 1.9.1.5. ETA Editor's Note A successful appeal does not warrant ADA compliance....
-
11B-407.4.8.2.1 Signal type
Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
-
PRIVATE BUILDING OR FACILITY
[DSA-AC] A place of public accommodation or a commercial building or facility subject to Chapter 1, Section 1.9.1.2. [2010 ADA Standards 106.5] Private Building or Facility....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
Elevators: ADA Standard Section 206.6
Section 206.6 covers scoping requirements in the most current ADA Standards for accessible routes to elevators.
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
- Big John Original Toilet Seat Open Front w Cover (White) - 3W
- Viking K-1600-EHFA Elevator Phone with Built-in Dialer and Digital Announcer
-
11B-607.4 Grab bars
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
11B-225.3 Self-service storage facilities
TABLE 11B-225.3 SELF-SERVICE STORAGE FACILITIES TOTAL SPACES IN FACILITY MINIMUM NUMBER OF SPACES REQUIRED TO BE ACCESSIBLE 1...
-
11B-225.3 Self-service storage facilities
TABLE 11B-225.3 SELF-SERVICE STORAGE FACILITIES TOTAL SPACES IN FACILITY MINIMUM NUMBER OF SPACES REQUIRED TO BE ACCESSIBLE 1...
-
ALTERATION
ETA Editor's Note ADA Title III §36.402(b)(1) also excludes asbestos removal from the definition of Alteration, unless it affects the usability of the building or facility: §36.402...
-
11B-607.4 Grab bars
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
ALTERATION
ETA Editor's Note ADA Title III §36.402(b)(1) also excludes asbestos removal from the definition of Alteration, unless it affects the usability of the building or facility: §36.402...
-
5b. Ramp Slope
Is the slope (up or down the ramp) no more than 1:12? [ADA Stds 4.7.2] Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance. Yes _____ No _____...
-
7.4.3.2 Cross Slope
The cross slope shall not exceed 1:20 (5 percent). Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...