EXCEPTION: Within employee work areas, the required clear width of ramps that are a part of common use circulation paths shall be permitted to be decreased by work area equipment provided...
Search Results "Building Permit"
Filters
Commonly Searched Documents
-
405.5 Clear Width
-
R302.4 Passing Spaces
Passing spaces are permitted to overlap pedestrian access routes....
-
4.1.1(3) Areas Used Only by Employees as Work Areas
These guidelines do not require that any areas used only as work areas be constructed to permit maneuvering within the work area or be constructed or equipped (i.e., with racks or shelves...
-
703.2.5 Character Height
EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be 1/2 inch (13 mm) minimum....
-
1013.1 General
EXCEPTION: When an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1013, the tent pad and tent platform shall comply with the provision...
-
Maneuvering for Turns
Some power chairs also may permit tight circular turns. A three-point turn is common when using scooters and other motorized devices that have a larger turning radius....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
-
§ 38.53(a)(2)
minimum clear width of 30 inches to one or more spaces where wheelchair or mobility aid users can be accommodated, then such doorway shall have a minimum clear opening of 30 inches to permit...
-
§ 38.73(a)(2)
minimum clear width of 30 inches to one or more spaces where wheelchair or mobility aid users can be accommodated, then such doorway shall have a minimum clear opening of 30 inches to permit...
-
11B-407.4.8.2.1 Signal type
per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or is about to stop at a floor served by the elevator shall be permitted...
-
1) Van parking
Alternatively, "universal parking" is permitted, in which all spaces can accommodate van widths (§4.1.2(5)(b)). UFAS: Van parking is not required. Universal parking is not addressed....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-612.2 Bench
Exception: A readily removable bench shall be permitted to obstruct the turning space required by Section 11B-612.3 and the clear floor or ground space required by Section 11B-903.2....
-
11B-407.4.8.2.1 Signal type
per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or is about to stop at a floor served by the elevator shall be permitted...
-
III-1.2000 Public accommodations
ILLUSTRATION: A medical care provider owns one building in which patients are seen, and another building in a different location that contains only administrative offices....
-
Yale 6000 Series Commercial Exit Devices
With a range of mechanical and electromechanical functions available, the 6000 can be used in many types of commercial facilities, including office buildings, retail environments, and mixed-use...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
A5121 - For beveled edge doors - Non-rising removable pin with button tip and plugs - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
ANSI A5122 - For beveled edge doors - Non-rising removable pin with button tip and plug - Two ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
ANSI A8221 - For square edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Garaventa Elvoron CPL Vertical Platform Lift
The Elvoron CPL is designed to provide access for people with disabilities in commercial buildings....
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
ANSI A8421 - Beveled surface leaf - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
Description: - ANSI A8321 - Beveled surface leaves - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
