The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall. The rear edge of...
Search Results "Shower Drain"
Filters
Commonly Searched Documents
-
11B-610.3.2 L-shaped seats
-
11B-809.4.1 Subsequent bathrooms
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided in...
-
11B-608.5.1 Reserved
[See subsections ...]
-
4.34.5.6 BATHTUB AND SHOWER ENCLOSURES
Enclosures for bathtubs or shower stalls shall not obstruct controls or transfer from wheelchairs onto shower or bathtub seats....
-
Willoughby Industries US-HC Cabinet Shower
S-3636-HC Accessible cabinet shower (select from model number and options list on next page) Shower cabinet shall be fabricated from 14 gauge, type 304 stainless steel....
-
2e
Is there a horizontal grab bar along each of the three shower walls at 33"-36" above the floor as shown in Figure 37(b) below?...
-
Access Board: Transfer Type Shower Compartments
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
4.26 Handrails, Grab Bars, and Tub and Shower Seats
[See subsections ...]
-
A4.26 Handrails, Grab Bars, and Tub and Shower Seats
[See subsections ...]
-
4.26 HANDRAILS, GRAB BARS, AND TUB AND SHOWER SEATS
[See subsections ...]
-
A4.26 HANDRAILS, GRAB BARS, AND TUB AND SHOWER SEATS
[See subsections ...]
-
11B-608.4 Seats
A folding seat shall be provided in roll-in type showers and transfer type shower compartments. Seats shall comply with Section 11B-610. [2010 ADA Standards] 608.4 Seats....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
11B-608.3.1 Reserved
[See subsections ...]
-
1g
g. Is there a horizontal grab bar on the wall opposite the seat as shown in Figure 37(a) above? [ADA Stds. 4.21.4; Fig. 37] Yes __ No __ N/A __ Comments:...
-
Seat [4.21.3]
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1‒1992 standard are acceptable. The seat must extend the full depth of...
-
7. Seat Transfer
Are the roll-in showers free of doors that would impede wheelchair transfer onto the seat? [ADA Stds. 4.21.8] Yes __ No __ N/A __ Comments: _______________________________________...
-
6. Grab Bar
Is there a horizontal grab bar on the wall opposite the seat for stabilization and aid in maneuvering while in a shower wheelchair?...
-
11B-608.4 Seats
A folding seat shall be provided in roll-in type showers. Seats shall comply with Section 11B-610. [2010 ADAS] 608.4 Seats. ...
-
11B-608.4 Seats
A folding seat shall be provided in roll-in type showers. Seats shall comply with Section 11B-610. [2010 ADAS] 608.4 Seats....
-
11B-809.10.6 Showers
Showers required by Section 11B-809.10 shall comply with this section....
