Search Results "Reach Range"

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1194 - Proposed Information and Communication Technology (ICT) Standards and Guidelines NPRM
  407.12.3.2.1 Height

  Table 407.12.3.2.1 Operable Part Height Table 407.12.3.2.1 Operable Part Height Reach Depth Operable Part Height Less than 20 inches (510 mm) 48...

• State and Local Documents > Guidelines > Accessible Golf Courses - A Summary of Accessibility Guidelines for Recreation Facilities
  Driving Ranges

  Driving Ranges Both stand-alone driving ranges and driving ranges adjacent to a golf course that provide teeing stations or practice teeing grounds must comply with the following:...

• Federal Documents > Regulations > 49 CFR Parts 37 & 38 - Department of Transportation (DOT) ADA Regulations
  § 38.127(c)

  (c) Controls and operating mechanisms (e.g., heating and air conditioning controls, lighting controls, call buttons, electrical outlets, etc.) shall be mounted no more than 48...

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.31.3* MOUNTING HEIGHT

  The highest operable part of the telephone shall be within the reach ranges specified in 4.2.5 or 4.2.6....

• Federal Documents > Preamble to Regulations > 36 CFR Part 1193 Telecommunications Act (Section 255) Accessibility Guidelines - Preamble
  Paragraph (f) Operable with limited reach and strength (Section-by-Section Analysis)

  Paragraph (f) Operable with limited reach and strength (Section-by-Section Analysis) Comment....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-104.1.1 Construction and manufacturing tolerances

  Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-104.1.1 Construction and manufacturing tolerances

  Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...

• Federal Documents > Standards > 2010 ADA Standards
  Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1

  Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.

• Federal Documents > Standards > 36 CFR Part 1194 - Information and Communication Technology (ICT) Final Standards and Guidelines (with amendments issued through Jan. 2018)
  302.8 With Limited Reach and Strength

  Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1194 - Proposed Information and Communication Technology (ICT) Standards and Guidelines NPRM
  302.8 With Limited Reach and Strength

  Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength....

• Research and History > Research Documents > Dimensional Tolerances in Construction and for Surface Accessibility
  1.1.2

  1.1.2 When a dimension range is the regulatory requirement use the midpoint of the range as the drawing dimension....

• Federal Documents > Standards > 36 CFR Part 1194 - Information and Communication Technology (ICT) Final Standards and Guidelines (with amendments issued through Jan. 2018)
  407.8.2.1 Unobstructed Side Reach

  Where the operable part is located 10 inches (255 mm) or less beyond the vertical reference plane, the operable part shall be 48 inches (1220 mm) high maximum and 15 inches (380 mm)...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1194 - Proposed Information and Communication Technology (ICT) Standards and Guidelines NPRM
  407.12.2.1 Unobstructed Side Reach

  Where the operable part is located 10 inches (255 mm) or less beyond the vertical reference plane, the operable part shall be 48 inches (1220 mm) high maximum and 15 inches (380 mm)...

• Federal Documents > Regulations > 36 CFR Part 1193 Telecommunications Act (Section 255) Accessibility Guidelines
  §1193.41(f) Operable with limited reach and strength

  (f) Operable with limited reach and strength. Provide at least one mode that is operable with user limited reach and strength....

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  A4.10.14 EMERGENCY COMMUNICATIONS

  A device that required no handset is easier to use by people who have difficulty reaching....

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  804.6.4 Range or Cooktop

  804.6.4 Range or Cooktop. Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with 306....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1194 - Proposed Information and Communication Technology (ICT) Standards and Guidelines NPRM - Preamble
  302.8 With Limited Reach and Strength (Section-by-Section Analysis)

  302.8 With Limited Reach and Strength (Section-by-Section Analysis) In this section, the Board proposes to address the functional performance criterion for users with limited reach or...

• Federal Documents > Standards > 36 CFR Part 1194 - Information and Communication Technology (ICT) Final Standards and Guidelines (with amendments issued through Jan. 2018)
  407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach

  Knee and toe space under ICT shall be 27 inches (685 mm) high minimum, 25 inches (635 mm) deep maximum, and 30 inches (760 mm) wide minimum and shall be clear of...