102 Dimensions for Adults and Children The technical requirements are based on adult dimensions and anthropometrics....
Search Results "Children's Reach Range"
Commonly Searched Documents
- 
    
  
  102 Dimensions for Adults and Children
  
- 
    
  
  4.31.3* Mounting Height
  The highest operable part of the telephone shall be within the reach ranges specified in 4.2.5 or 4.2.6.... 
- 
    
  
  Play Tables: ADA Standard Section 1008.4.3
  EXCEPTION: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required... 
- 
    
  
  11B-1008.4.3 Play tables
  Exception: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required... 
- 
    
  
  F102 Dimensions for Adults and Children
  In addition, this document includes technical requirements based on children's dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks... 
- 
    
  
  407.12.3 Forward Reach (Section-by-Section Analysis)
  407.12.3 Forward Reach (Section-by-Section Analysis) This section contains proposed requirements for operable parts providing either an unobstructed or obstructed forward reach.... 
- 
    
  
  11B-604.9.4 Grab bars
  Grab bars for water closets shall comply with Section 11B-604.5. 
- 
    
  
  407.8.1.1 Vertical Plane for Side Reach
  Where a side reach is provided, the vertical reference plane shall be 48 inches (1220 mm) long minimum.... 
- 
    
  
  407.8.1.2 Vertical Plane for Forward Reach
  Where a forward reach is provided, the vertical reference plane shall be 30 inches (760 mm) long minimum.... 
- 
    
  
  407.12.1.1 Vertical Plane for Side Reach
  Where a side reach is provided, the vertical reference plane shall be 48 inches (1220 mm) long minimum.... 
- 
    
  
  5.6 Tableware and Condiment Areas
  Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall be installed to comply with 4.2 (see Fig. 54). 
- 
    
  
  Verify Electrical
  VERIFY ELECTRICAL – remember finish material thicknesses! Heights of all 30 amp or less outlet boxes. Measure to top or bottom of... 
- 
    
  
  Verify Electrical
  VERIFY ELECTRICAL – remember finish material thicknesses! Heights of all 30 amp or less outlet boxes. Measure to top or bottom of... 
- 
    
  
  5.3 TABLEWARE AREAS
  Install tableware, dishware, condiment, food and beverage display shelves, and dispensing devices in compliance with 4.2 (see Fig. 54). 
- 
    
  
  § 38.107(a)(4)
  (4) Faucets and flush controls shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls shall... 
- 
    
  
  407.12.1.2 Vertical Plane for Forward Reach
  Where a forward reach is provided, the vertical reference plane shall be 30 inches (760 mm) long minimum. Figure 407.12.1... 
- 
    
  
  Practice Putting Greens, Practice Teeing Grounds, and Teeing Stations at Driving Ranges: ADA Standard Section 238.3
  Section 238.3 covers scoping requirements in the ADA Standards for practice putting greens, practice teeing grounds, and teeing stations at driving ranges. 
- 
    
  
  Forward Approach and Reach
  [See subsections ...] 
- 
    
  
  Toe Clearance: ADA Standard Section 604.8.1.4
  Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments. 
- 
    
  
  11B-604.8.1.4 Toe clearance
  Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor. [2010 ADA Standards] 604.8.1.4 Toe Clearance.... 
- 
    
  
  407.12.3.2.1 Height (Section-by-Section Analysis)
  depending on reach depth.... 
- 
    
  
  11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges
  At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car... 
