At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car...
Search Results "Children's Reach Range"
Commonly Searched Documents
-
11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges
-
11B-102 Dimensions for adults and children
In addition, this chapter includes technical requirements based on children's dimensions and anthropometries for drinking fountains, water closets, toilet compartments, lavatories and sinks...
-
11B-102 Dimensions for adults and children.
In addition, this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks...
-
11B-102 Dimensions for adults and children
In addition, this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks...
-
Utility Sinks
If utility sinks are provided in a recreation facility that also contains a cook top or conventional range, at least 5 percent (but not less than 1) in each accessible room or space must...
-
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis)
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis) This section proposes that, where a side approach is provided, the vertical reference plane must have a minimum...
-
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis)
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis) This section proposes that, where a forward reach is provided, the vertical reference plane must be, at a minimum...
-
Driving Ranges
Driving Ranges Both stand-alone driving ranges and driving ranges adjacent to a golf course that provide teeing stations or practice teeing grounds must comply with the following:...
- Kompan, Inc. Solitaires Spinners - GXY926 - Miram Video
-
Knee and Toe Space
If the forward reach to operable parts extends over an obstruction, such as a counter, clearances for toes and knees is required below....
-
§ 38.127(c)
(c) Controls and operating mechanisms (e.g., heating and air conditioning controls, lighting controls, call buttons, electrical outlets, etc.) shall be mounted no more than 48...
-
407.12.3.2.1 Height
Table 407.12.3.2.1 Operable Part Height Table 407.12.3.2.1 Operable Part Height Reach Depth Operable Part Height Less than 20 inches (510 mm) 48...
-
4.31.3* MOUNTING HEIGHT
The highest operable part of the telephone shall be within the reach ranges specified in 4.2.5 or 4.2.6....
-
604.1 General
EXCEPTION: Water closets and toilet compartments for children’s use shall be permitted to comply with 604.9....
-
604.1 General
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9....
-
604.1 General
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9....
-
604.1 General
EXCEPTION: Water closets and toilet compartments for children’s use shall be permitted to comply with 604.9....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
11B-604.1 General
Exception: Water closets and toilet compartments for children's use shall be permitted to comply with Section 11B-604.9....
-
11B-604.1 General
Exception: Water closets and toilet compartments for children's use shall be permitted to comply with Section 11B-604.9....
-
Paragraph (f) Operable with limited reach and strength (Section-by-Section Analysis)
Paragraph (f) Operable with limited reach and strength (Section-by-Section Analysis) Comment....
-
11B-604.1 General
Exception: Water closets and toilet compartments for children's use shall be permitted to comply with Section 11B-604.9....
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.