Nosings that project beyond risers shall have the underside of the leading edge curved or beveled....
Search Results "Beveled Threshold"
Filters
Commonly Searched Documents
-
R408.5 Nosings
-
1) Where the Standard specifically refers to 303
specifically refers to 303, such as 403.4 changes in level for walking surfaces: Here it is clear that changes in level that comply with either the ¼" maximum vertical rise, the ½" maximum beveled...
-
302.2 With Limited Vision (Section-by-Section Analysis)
They recommended that the Board establish thresholds for how much magnification, reduction, or contrast is sufficient to meet the provision....
-
504.5 Nosings
Nosings that project beyond risers shall have the underside of the leading edge curved or beveled....
-
504.5 Nosings
Nosings that project beyond risers shall have the underside of the leading edge curved or beveled....
-
504.5 Nosings
Nosings that project beyond risers shall have the underside of the leading edge curved or beveled....
-
4.5.2 Changes in Level
Changes in level between 1/4 in and 1/2 in (6 mm and 13 mm) shall be beveled with a slope no greater than 1:2 (see Fig. 7(d))....
-
4.5.2 CHANGES IN LEVEL
Changes in level between 1/4 in and 1/2 in (6 mm and 13 mm) shall be beveled with a slope no greater than 1:2 (see Fig. 7(d))....
-
You're Never Too Young ... to Learn About the ADA
Children playing with their toys notice that only one of their door thresholds is compliant. They remind us that we are never too young to learn about the ADA....
-
Section 1630.2(j)(1)(iii) Substantial Limitation Should Not Be Primary Object of Attention; Extensive Analysis Not Needed
Accordingly, the threshold issue of whether an impairment ‘substantially limits' a major life activity should not demand extensive analysis.”...
-
408.3 Flashing
EXCEPTION: Flashes that do not exceed the general flash and red flash thresholds defined in WCAG 2.0 (incorporated by reference, see 702.10.1) are not required to conform to 408.3....
-
405.1 General
EXCEPTION: Flashes that do not exceed the general flash and red flash thresholds defined in WCAG 2.0 (incorporated by reference in Chapter 1) are not required to conform to 405....
-
§ 38.25(b) Contrast
All step edges, thresholds and the boarding edge of ramps or lift platforms shall have a band of color(s) running the full width of the step or edge which contrasts from the step tread and...
-
PURPOSE
Code Sections 17295 and 81133 are required to be submitted to the Division of the State Architect (DSA) for review and approval, and to make the annual adjustment to the construction cost thresholds...
-
PEMKO 2" to 48" Aluminum Plates No. 14/1
About Commercial Thresholds (CT) Pemko manufactures thresholds in several materials to meet customer needs....
-
§1630.2(j)(1)(iii)
Accordingly, the threshold issue of whether an impairment “substantially limits” a major life activity should not demand extensive analysis....
-
Elevator Car Requirements [§407.4.2 – §407.4.5]
a maximum 1¼” horizontal clearance between car platform sill and hoistway landing a self-leveling feature 5 ft. candles min. illumination at platform, controls, threshold...
-
4(2)
(2) In single-story dwelling units, changes in level within the dwelling unit with heights between 1/4 inch and 1/2 inch are beveled with a slope no greater than 1:2....
-
PEMKO 2" to 48" Aluminum Plates No. 18/1
Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
Observations:
The wheelchair scale we used had a leveled surface of length 30 in. long with a bevel of 5 in. each at both ends (i.e., total length of 40 in.)....
-
§ 36.105(d)(1)(ii)
Accordingly, the threshold issue of whether an impairment substantially limits a major life activity should not demand extensive analysis....
-
§ 35.108(d)(1)(ii)
Accordingly, the threshold issue of whether an impairment substantially limits a major life activity should not demand extensive analysis....
-
4. Implications for Standards
There are many ways to look at the data we have collected to determine a threshold....
-
PEMKO 5 29/32" Floor Plates/Safety Treads No. 2266
Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
