The platform shall have a minimum clear width of 28 1/2 inches (725 mm) at the platform, a minimum clear width of 30 inches (760 mm) measured from 2 inches (50 mm) above the platform surface...
Search Results "Grade 2 Braille"
-
§ 38.159(b)(6) Platform surface
-
A. Accessible Guestrooms
Column "B" Total Rooms in Facility Accessible Rooms Rooms with Roll-in Showers 1 to 25 1 0 26 to 50 2...
-
219.3 Receivers
required receivers shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2....
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
11B-208.2 Minimum number
PARKING SPACES PROVIDED IN PARKING FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE PARKING SPACES 1 to 25 1 26 to 50 2...
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
11B-208.2 Minimum number
PARKING SPACES PROVIDED IN PARKING FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE PARKING SPACES 1 to 25 1 26 to 50 2...
-
11B-206.2.8 Employee work areas
EEOC can provide guidance regarding employers' obligations to provide reasonable accommodations for employees with disabilities. 2....
-
11B-206.2.8 Employee work areas
EEOC can provide guidance regarding employers' obligations to provide reasonable accommodations for employees with disabilities. 2....
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
4.3 Periodic Reviews.
49 CFR § 27.11(c)(2)(v) requires airports to establish a system for periodically reviewing and updating the self-evaluation required by paragraph (c)(2) of that Section. 28 CFR § 35.151...
-
4.9.3 Nosings
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
4.9.3 NOSINGS
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
1018.10 Dune Crossings
The curbs or barriers are required to prevent the passage of a 2 inch diameter sphere, where any portion of the sphere is within 2 inches of the crossing surface....
-
§ 38.159(c)(3) Ramp threshold
Changes in level between 1/4 inch (6.5 mm) and 1/2 inch (13 mm) shall be beveled with a slope no greater than 1:2....
-
§ 38.95(c)(3) Ramp threshold
Changes in level between 1/4 inch and 1/2 inch shall be beveled with a slope no greater than 1:2....
-
General Exceptions in FSTAG
In addition, if General Exception 2 applies, send notification to the U.S. Access Board....
-
APPENDIX A. GUIDELINES FOR SERVICE ANIMAL RELIEF AREAS (SARA)
A.2 Number. A.2.1 At least one SARA must be located in each public sterile area of each terminal....
-
Seton California State Signs - Parking Only with ISA and Minimum Fine
allocated parking spots, invest on durable California state signs Material options: Polyethylene, Steel, and Aluminum High-Intensity Reflective, Non-Reflective, and Engineer-Grade...
-
Seton 12" x 18" Symbol of Access Parking Sign Kit - Reserved Parking
Convenient Symbol Of Access Sign And Post Kit contains a sturdy 12"W x 18"H aluminum sign with an Engineer Grade reflective finish, an 8'L green baked-enamel post and a set of nuts...
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
