The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
Search Results "Grade 2 Braille"
-
1134A.8, Item 4.3
-
1134A.8, Item 4.3
The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
-
1.2.7
1.2.7 When local variations (flatness) for cross slope of ramps are measured according to 1.1.14 at least 80% (rounded to the nearest whole number) should not exceed a 2% slope....
-
11B-407.2.2.1 Visible and audible signals
Reserved. 2. Reserved. [2010 ADAS] 2. In existing elevators, a signal indicating the direction of car travel shall not be required....
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
- Hager Companies 3800 Series Escutcheon
-
Minimum Number [9.1.2 and 9.1.3]
VISUAL APPLIANCES ONLY Total MOBILITY ACCESS & VISUAL APPLIANCES Total (portion of total with roll in showers) 1‒25* 1 1 26‒50 2...
-
2.2.6 Door Use
The door characteristics are summarized in Table 2‒3. Table 2‒3. Characteristics of doors tested. ...
- Big John Original Toilet Seat Open Front w Cover (White) - 3W
-
xdfvdygfvyusgf yugyugzsduyfcgds ufdsgfuygsduyfcdsfvsvgfdb
/formidable/2/faqs_finalL_list_offf_quickbooks_payrollL_latest_listtt_2O26.pdf https://www.ballstonva.org/wp-content/uploads/formidable/2/faqs_finalL_list_offf_quickbooks_desktopp_latest_listtt...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
11B-106.4 Interchangeability
See Chapter 2, Section 201.2....
-
11B-106.4 Interchangeability
See Chapter 2, Section 201.2....
-
11B-106.4 Interchangeability
See Chapter 2, Section 201.2....
-
501.1 Scope (Section-by-Section Analysis)
501.1 Scope (Section-by-Section Analysis) This section proposes that the technical requirements for software in this chapter be applied where either (a) required by 508 Chapter 2 or 255...
-
1. Number of Roll-in Showers
Column "B" Total Rooms in Facility Accessible Rooms Rooms with Roll-in Showers 1 to 25 1 0 26 to 50 2...
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
1118B.3
.2, respectively. 1124B.3 Carpet. ...
-
11B-604.5.2 Rear wall
The Office of Statewide Health Planning and Development (OSHPD), which has jurisdiction over hospitals and long-term care facilities in California, issued Code Application Notice CAN 2-...
-
11B-604.5.2 Rear wall
The Office of Statewide Health Planning and Development (OSHPD), which has jurisdiction over hospitals and long-term care facilities in California, issued Code Application Notice CAN 2-...
-
10. Prescription Drug Container Labels
The working group explored various access alternatives, including braille, large print labels, and auditory technologies such as “talking bottles” and radio frequency identification tags...
-
Scoping Requirements
As reorganized, signs required to provide tactile and visual access must meet criteria for tactile characters (703.2), braille (703.3), mounting height and location (703.4), and visual characters...