A means for visually identifying a visitor without opening the residential dwelling unit entry door shall be provided and shall allow for a minimum 180 degree range of view....
Search Results "High Energy Door"
-
809.5.5.2 Identification
-
Landscape Forms Inc. MutipliCITY Path Light Illuminated Bollards
Energy-saving LED path lights are offered in solar or powered versions. The solar light provides an ambient glow for wayfinding....
-
1008.4.3 Play Tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (430 mm) minimum, and 30 inches (760 mm) wide minimum shall be provided....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2....
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
1008.4.3 Play Tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (430 mm) minimum, and 30 inches (760 mm) wide minimum shall be provided....
-
Accessible Route to Dumpster and Enclosure
The dumpster is typically on the property site, serves the retail store, is open-air, usually has a fence with gate or door(s), and is often across an internal driveway (although some configurations...
-
611 Washing Machines and Clothes Dryers
The proposed rule required the door of top loading machines and the door opening of front loading machines to be 34 inches maximum above the floor (611.4)....
-
11B-404.2.11 Vision lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
4.34.6.7* OVENS
For side-opening ovens, the door latch side shall be next to the open counter space, and there shall be a pull-out shelf under the oven extending the full width of the oven and pulling out...
-
Door King Inc. 6050 / 6100 Residential and Commercial Swing Gate Operator
The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either...
-
Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms: ADA Standard Section 213.2.1
Section 213.2.1 covers scoping requirements in the current ADA Standards for unisex (single-use or family) toilet and unisex bathing rooms.
-
1010.1.9.7 Delayed egress locks
A sign shall be provided on the door and shall be located above and within 12 inches (305 mm) of the door exit hardware: 6.1....
-
Unite 2 Fight Paralysis
Motivated by the knowledge and energy gained at the Rally, Susan, Betheny and Marilyn founded Unite 2 Fight Paralysis (U2FP) in late 2005, and a unique advocacy organization was born....
-
Rebuilding Together Austin - Austin, TX
Our focus provides critical repairs, accessibility modifications and energy efficient upgrades to low-income homes and community centers at no cost....
-
Route and Destination Signs
Comments pointed out that this exception should allow characters to be less than 3 inches high for consistency with the character heights specified for signs generally in section 703....
-
303.2 Vertical
Changes in level of 1/4 inch (6.4 mm) high maximum shall be permitted to be vertical....
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
Thresholds at Doorways [4.13.8]
Thresholds at Doorways [4.13.8] Thresholds complicate wheelchair maneuvering through doors, especially at doors equipped with closers....
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
11B-1008.4.3 Play tables
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (432 mm) minimum, and 30 inches (762 mm) wide minimum shall be provided....
