The XCE9020 is a Standalone Keypad Classroom Security function lock that provides a remote lockdown along with the security afforded by using a grade 1 heavy duty cylindrical lockset....
Search Results "Grade 2 Braille"
-
TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
-
Rakks® Brackets Installation Video
Depending on length and load capacities, brackets are manufactured in 1-1/4” and 2” heights. Rakks Style brackets have excellent lateral support and work well as bookends....
-
Sections 505.10.2 and 505.10.3
Existing horizontal handrail extensions that comply with 4.9.4(2) of the 1991 Standards should meet or exceed the requirements of the 2010 Standards....
-
Technical Memorandum TM 2012-07 Press Boxes
the terms "aggregate area" and "square feet" in 206.2.7, Press Boxes, Exceptions 1 and 2: 1....
-
WorkZone Safety Products Retractable Cone Bar
Light weight and extremely portable Easy to set up or remove Providing an instant inexpensive barrier to hazardous or controlled access areas Made with high quality industrial grade...
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
All 88 series exit devices are UL listed from Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 1994, Grade 1....
-
11B-1001.1 Scope
The provisions of Division 10 shall apply where required by Division 2 or where referenced by a requirement in this chapter. Advisory 11B-1001.1 Scope....
-
Scope: ADA Standard Section 801.1
The provisions of Chapter 8 shall apply where required by Chapter 2 or where referenced by a requirement in this document. Advisory 801.1 Scope....
-
11B-1001.1 Scope
The provisions of Division 10 shall apply where required by Division 2 or where referenced by a requirement in this chapter. Advisory 11B-1001.1 Scope....
-
§ 38.23(c)(3) Ramp threshold
Changes in level between 1/4 inch and 1/2 inch shall be beveled with a slope no greater than 1:2....
-
APPROVED TESTING AGENCY
[HCD 1, HCD 2, DSA-AC & OSHPD 1, 1R, 2, 4 & 5] Any agency, which is determined by the enforcing agency, except as otherwise provided by law, to have adequate personnel and expertise...
-
Sargent 278 Series Overhead Concealed Door Closer
for 3' door width Closers can be factory preset upon request Delayed Action option available - DA Suffix Auxiliary door stop required Strength & Durability ANSI/BHMA Grade...
-
Allegion Falcon T-Series Mechanical Locks
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements: All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade...
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope. ...
-
R204 Pedestrian Access Routes (Section-by-Section Analysis)
Pedestrian access routes must be provided within: Sidewalks and other pedestrian circulation paths located in the public right-of-way; Pedestrian street crossings and at-grade...
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope....
-
UFAS vs. ADAAG Comparison - Assembly Seating
Required Wheelchair Locations ADAAG Number of Required Wheelchair Locations 4 to 25 1 0 1 26 to 49 2...
-
4.1.6(4)(a)
Curb ramps and ramps to be constructed on existing sites or in existing buildings or facilities may have slopes and rises as shown in Table 2 if space limitations prohibit the use of a 1...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
401.1 Scope
The requirements of Chapter 4 shall apply to ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
-
Wheelchair
This definition does not apply to Federal wilderness areas; wheelchairs in such areas are defined in section 508(c)(2) of the ADA, 42 U.S.C. 12207(c)(2)....
-
T302.4 Surface Discontinuities
Surface discontinuities shall be ½ inch (13 mm) high maximum and shall be beveled with a slope not steeper than 1:2. EXCEPTIONS: 1....
-
Wheelchair
This definition does not apply to Federal wilderness areas; wheelchairs in such areas are defined in section 508(c)(2) of the ADA, 42 U.S.C. 12207(c)(2)....
