A 2 inch high edge protection must be provided on the back of the platform, opposite the entry ramp and a minimum 2 inch high edge protection on the sides of the platform....
Search Results "Grade 2 Braille"
-
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
-
Minimum Number: ADA Standard Section 208.2
Section 208.2 of the ADA Standards coversscoping requirements in the most current ADA Standards for the minimum number of parking spaces required.
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADA Standards] 604.4 Seats....
-
104.11 Alternative materials, design and methods of construction and equipment
The alternative material, design or method of construction is satisfactory and complies with the intent of the provisions of this code, 2....
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADA Standards] 604.4 Seats....
-
Seton Directional Entrance Sign - Left Arrow
Use Accessible Entrance Signs to direct users to the nearest accessible entrance Engineer Grade reflective .063" aluminum material is equally visible day or night Extend the life...
-
Sargent 8200 Lever Lock
The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry....
-
Rebuilding Together Oakland County - Farmington Hills, MI
Our Impact In The Community Oakland County 2015 Total Impact 37 houses rehabilitated during our National Rebuild Day. 2 additional large scale home repair projects throughout...
-
Addendum E: Comparison of participants tested at the National Disabled Veterans Winter Sports Clinic (NDVWSC) compared to the participants tested at the Human Engineering Research Laboratories and Hiram G. Andrews Center
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). ...
-
Sample Action Plan
Develop list of places to request in-person and video-relay interpreters. 2. Send list to staff and committees. 3....
-
Pushbutton-integrated APS
Pushbutton-integrated APS Figures 1 and 2 show several of the pushbutton-integrated APS devices that are available in the US....
-
§ 38.23(b)(6) Platform surface
The platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the platform surface to 30 inches above the...
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
§ 38.83(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.125(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.23(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2...
-
§ 38.95(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
701.1 Scope
The standards referenced in Chapter 7 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where referenced in any other chapter...
-
301.1 Scope
The requirements of Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other...
-
1002.1 Definitions
The following terms are defined in Chapter 2: ACCESSIBLE MEANS OF EGRESS. AREA OF REFUGE. EXIT. GUARD ([DSA-AC, HCD 1 & HCD 2] or GUARDRAIL). HANDRAIL....
-
601.1 Scope (Section-by-Section Analysis)
Section-by-Section Analysis) This section proposes that the technical requirements for support documentation and services in this chapter be applied where either (a) required by 508 Chapter 2...
-
§ 38.57(c)
(c) The diameter or width of the gripping surface of handrails and stanchions shall be 11/4 inches to 11/2 inches or provide an equivalent gripping surface and shall provide a minimum 11...
-
1. Public Right-of-Way
RT 738:2-739:22, 800:14-801:25, 817:12-819:2, 2065:1-20. Margen is not an architect....
-
New Construction
must be read in conjunction with Chapter 2 to ensure an accurate understanding of the legal requirements....
