Is the running slope no greater than 1:12?...
Search Results "Grade 1 Braille"
-
f-i
-
11B-101.2 Reserved.
technical and scoping specifications for those elements in either the 1991 Standards or in the Uniform Federal Accessibility Standards (UFAS), Appendix A to 41 CFR part 101–19.6 (July 1,...
-
11B-101.2 Reserved.
technical and scoping specifications for those elements in either the 1991 Standards or in the Uniform Federal Accessibility Standards (UFAS), Appendix A to 41 CFR part 101–19.6 (July 1,...
-
E102.6 ISO (Section-by-Section Analysis)
E102.6 ISO (Section-by-Section Analysis) ISO 14289-1 (2012), Document management applications — Electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000...
- Allegion Falcon 1690 Series Exit Devices
-
Use Zone
ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see “Referenced Standards” in Chapter 1)...
-
General: ADA Standard Section 213.1
Section 210.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for toilet facilities and bathing facilities.
-
Rectangular Seats: ADA Standard Section 610.3.1
Section 610.3.1 covers the current ADA Standards for rectangular shower compartment seats.
-
11B-809.7.2 Changes in level
Ramps complying with Section 11B-405, elevators complying with Section 11B-407 or platform lifts complying with Section 11B-410 shall be provided where changes in level exceed 1/2 inch (...
-
11B-610.3.1 Rectangular seats
The side edge of the seat shall be 1½ inches (38 mm) maximum from the adjacent wall....
-
11B-809.7.2 Changes in level
Ramps complying with Section 11B-405, elevators complying with Section 11B-407 or platform lifts complying with Section 11B-410 shall be provided where changes in level exceed 1/2 inch (...
-
11B-610.3.1 Rectangular seats
The side edge of the seat shall be 1½ inches (38 mm) maximum from the adjacent wall....
-
5.4.4.2 Transfer Support Distance from Transfer Surface Recommendation for Imaging Equipment
5.4.4.2 Transfer Support Distance from Transfer Surface Recommendation for Imaging Equipment The Committee recommends a maximum distance of 1 1/2 inches from the transfer surface to the...
-
Building Directories
While the ADA Standards at 216 (see below) specifically exempt building directories from complying with the ADA, there is a requirement in the ADA's Title III Regulations at §36.303(c)(1)...
-
1017.7.1 Maximum Running Slope and Segment Length
Not more than 30 percent of the total length of a trail shall have a running slope steeper than 1:12 (8.33%)....
-
B1
Standards § 4.1.2(5)(a)] Yes No Total Number of Parking Spaces in Each Parking Area Required Minimum Number of Accessible Spaces 1-...
- IMPACT CIL - Alton, IL
-
Handrails [4.8.5]
ADAAG shows a diameter of 1¼ to 1½ inch for handrails. A standard IPS pipe designated as 1¼ to 1½ inch is acceptable....
-
Talking Three-Dimensional Models for Way-finding
There are some Braille labels on the buildings and a clear You Are Here marker....
-
11B-221.2.1.1 General seating
OF WHEELCHAIR SPACES IN ASSEMBLY AREAS NUMBER OF SEATS MINIMUM NUMBER OF REQUIRED WHEELCHAIR SPACES 4 to 25 1...
-
A1. Parking Count
Yes _____ No _____ Total Spaces for Polling Place Required Minimum Number of Accessible Spaces 1-25 1 van-accessible space w/ min. 96 inch wide access...
-
11B-221.2.1.1 General seating
TABLE 11B-221.2.1.1 NUMBER OF WHEELCHAIR SPACES IN ASSEMBLY AREAS Number Of Seats Minimum Number Of Required Wheelchair Spaces 4 to 25 1...
-
§ 38.125(c)(8) Handrails
The handrail shall have a cross-sectional diameter between 1 1/4 inches and 1 1/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
11B-221.2.1.1 General seating
OF WHEELCHAIR SPACES IN ASSEMBLY AREAS NUMBER OF SEATS MINIMUM NUMBER OF REQUIRED WHEELCHAIR SPACES 4 to 25 1...