modifications are necessary for the installation, an accessible route shall be provided between the levels served by the escalator or stair unless exempted by Section 11B-206.2.3 Exceptions 1...
Search Results "Grade 1 Braille"
-
11B-206.2.3.1 Stairs and escalators in existing buildings
-
11B-404.2.4.4 Floor or ground surface
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exceptions: Reserved....
-
C1-4. Accessible Route Level Changes
Is the accessible route free of steps and abrupt level changes over 1/2 inch? Note: Level changes between 1/4 inch and 1/2 inch should be beveled. Yes _____ No _____...
-
Thresholds [§404.2.5]
Thresholds [§404.2.5] The height of thresholds is limited to 1/2” in new construction. The edge must be beveled 1:2 maximum above a height of 1/4”....
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
ETA Public Telephone Summary Chart and Survey Instructions
per floor. [4.1.3(17)(a)] b. 1 per floor, when 1 bank is provided on this floor [4.1.3(17)(a)] c. 1 per bank, when 2 or more banks are provided on this floor....
-
219.3 Receivers
EXCEPTIONS: 1....
-
Changes in Level [§303]
Changes in Level [§303] Changes in level can be up to ¼” without treatment or ½” if beveled with a slope no steeper than 1:2....
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
-
505.6 Gripping Surface
Where provided, horizontal projections shall occur 1 1/2 inches (38 mm) minimum below the bottom of the handrail gripping surface. EXCEPTIONS: 1....
-
C102.6 International Standards Organization (ISO)
Copies of the referenced standards, may be obtained from International Organization for Standardization, ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56 - CH-1211 Geneva 20, Switzerland...
-
Size and Spacing of Grab Bars and Handrails [4.26.2]
A gripping surface with a diameter between 1¼ to 1½ inches is specified. Alternate shapes are permitted that allow a similar opposing grip....
-
E102.6 International Standards Organization (ISO)
Copies of the referenced standards may be obtained from International Organization for Standardization, ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56 - CH-1211 Geneva 20, Switzerland...
-
Parking
., no greater than 1:50 or 2%)....
-
A4.8.2 Slope and Rise
Ramp slopes between 1:16 and 1:20 are preferred. The ability to manage an incline is related to both its slope and its length....
- Seton Directional Entrance Sign - Left Arrow
-
224.2 Guest Rooms with Mobility Features
EXCEPTIONS: 1....
-
B. Interior Ramps
Interior Ramps (1) Royal Street Entrance Interior Ramp - Defendants will rebuild this ramp so that it meets 2010 Standards §§ 206.2.4 and 405....
-
Minimum Number of Accessible Parking Spaces [§208.2]
Parking Spaces [§208.2] Parking Facility Total Minimum Number of Accessible Spaces Standard Van* Total (Standard + Van) 1...
-
11B-235.2 Boat slips
TABLE 11B-235.2 BOAT SLIPS TOTAL NUMBER OF BOAT SLIPS PROVIDED IN FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE BOAT SLIPS 1...
-
11B-235.2 Boat slips
TABLE 11B-235.2 BOAT SLIPS TOTAL NUMBER OF BOAT SLIPS PROVIDED IN FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE BOAT SLIPS 1...
-
Escalators: ADA Standard Section 810.9
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see “Referenced Standards” in Chapter 1) and shall have a clear...
-
Platform Lifts: ADA Standard Section 207.2
Section 207.2 covers scoping requirements in the most current ADA Standards for platform lifts used as part of an accessible means of egress.