At door landings, handrails are not required on ramp runs less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
Search Results "Door Hardware"
-
11B-405.8 Handrails
-
11B-604.3.1 Size
Note The CBC 11B-604.3.1 requirement for maneuvering space in front of accessible water closets exceeds the 2010 ADA Standards requirement for water closet clear floor space, but a door...
-
11B-206.4 Entrances
Entrance doors, doorways, and gates shall comply with Section 11B-404 and shall be on an accessible route complying with Section 11B-402. Exceptions: 1. Reserved....
-
11B-604.3.1 Size
Note The CBC 11B-604.3.1 requirement for maneuvering space in front of accessible water closets exceeds the 2010 ADA Standards requirement for water closet clear floor space, but a door...
-
11B-405.8 Handrails
At door landings, handrails are not required on ramp runs less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
The triangle symbol shall contrast with the door, either light on a dark background or dark on a light background....
-
11B-213.2.1 Unisex (single-use or family) toilet and unisex bathing rooms
Doors to unisex toilet rooms and unisex bathing rooms shall have privacy latches....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
11B-612.2 Bench
Doors shall not swing into the clear floor space required by Section 11B-903.2....
-
11B-505.2 Where required
At door landings, handrails are not required when the ramp run is less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
The triangle symbol shall contrast with the door, either light on a dark background or dark on a light background....
-
R302.2 Components
Doors, doorways, and gates complying with section 404 of Appendix D to 36 CFR part 1191. Advisory R302.2 Components....
-
City of XXX – ADA Transition Plan
Facilities manager $450 Maintenance and repairs City Council room Inadequate maneuvering clearance at entrance door...
-
Material Characteristics (slide 6)
But now it’s hard for people to find which ones of those [glass panels] are doors....
-
1022.9 Stairway identification signs
comply with Chapter 11A, Section 1143A or Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5 shall be located at the landing of each floor level, placed adjacent to the door...
-
A. Accessible Voting Program
facilities and equipment (including, but not limited to, permanent equipment such as lifts and elevators, and temporary equipment such as portable ramps, traffic cones, signs, wedges, and door...
-
II-6.5000 Alterations to historic properties
There appears, however, to be a problem if one of the interior doors is widened, because historic decorative features on the door might be destroyed....
-
1134A.5 Bathtubs
Doors and panels of bathtub enclosures shall be substantially constructed from approved, shatter-resistant materials. Hinged doors shall open outward....
-
Mockett CH13K Quadruple Organic Coat Hooks
Mounting hardware included. Finishes: Matte Black, Satin Nickel, Polished Chrome and Metallic Silver....
-
Place of Public Accommodation
stadium or other place of exhibition or entertainment; (d) an auditorium, convention center, lecture hall or other place of public gathering; (e) a bakery, grocery store, clothing store, hardware...
-
402.2 Speech-Output Enabled (Section-by-Section Analysis)
., hardware without display screens), this means ensuring that the ICT has built-in speech output. This explicit requirement would be new to the 508 Standards....
-
A. Proposed 508 Standards
The proposed technical requirements, which are organized along the lines of ICT functionality, provide standards to ensure that covered hardware, software, electronic content, and support...
-
6.2. Scoping Requirements
Percent ($ millions) Cost Category Initial RA Scoping Alternative Primary Analysis Percent Change Captioning Hardware...
-
Landscape Forms Inc. Lakeside Bench Collection
Frames are dual 1/4" thick steel, welded and bolted together with stainless steel hardware Available backed or backless End arms standard on backed benches Freestanding/surface mount...
