Changes in Level [§303] Changes in level can be up to ¼” without treatment or ½” if beveled with a slope no steeper than 1:2....
Search Results "Grade 1 Braille"
-
Changes in Level [§303]
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
Glazing: Clear Low-E tempered 1 3/8″ insulated is the standard. A minimum of 1/4″ single pane glass to a maximum 1 1/2″ hurricane rated insulated glass may be used....
-
219.3 Receivers
EXCEPTIONS: 1....
-
505.6 Gripping Surface
Where provided, horizontal projections shall occur 1 1/2 inches (38 mm) minimum below the bottom of the handrail gripping surface. EXCEPTIONS: 1....
-
A4.8.2 Slope and Rise
Ramp slopes between 1:16 and 1:20 are preferred. The ability to manage an incline is related to both its slope and its length....
-
C102.6 International Standards Organization (ISO)
Copies of the referenced standards, may be obtained from International Organization for Standardization, ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56 - CH-1211 Geneva 20, Switzerland...
-
Size and Spacing of Grab Bars and Handrails [4.26.2]
A gripping surface with a diameter between 1¼ to 1½ inches is specified. Alternate shapes are permitted that allow a similar opposing grip....
-
E102.6 International Standards Organization (ISO)
Copies of the referenced standards may be obtained from International Organization for Standardization, ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56 - CH-1211 Geneva 20, Switzerland...
-
Parking
., no greater than 1:50 or 2%)....
-
B. Interior Ramps
Interior Ramps (1) Royal Street Entrance Interior Ramp - Defendants will rebuild this ramp so that it meets 2010 Standards §§ 206.2.4 and 405....
-
224.2 Guest Rooms with Mobility Features
EXCEPTIONS: 1....
-
Minimum Number of Accessible Parking Spaces [§208.2]
Parking Spaces [§208.2] Parking Facility Total Minimum Number of Accessible Spaces Standard Van* Total (Standard + Van) 1...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum....
-
Federal Elevator 360 Passenger Elevator
The 360 elevator space efficient design makes it an ideal commercial elevator with a maximum capacity of 1815 kg. (4000 lbs.) and a maximum speed of 1 m/s. (200 feet per minute)....
-
Escalators: ADA Standard Section 810.9
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see “Referenced Standards” in Chapter 1) and shall have a clear...
-
11B-503.4 Floor and ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-307.3.1 Edges and corners
edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum radius of 1/...
-
Platform Lifts: ADA Standard Section 207.2
Section 207.2 covers scoping requirements in the most current ADA Standards for platform lifts used as part of an accessible means of egress.
-
11B-503.4 Floor and ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-307.3.1 Edges and corners
edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum radius of 1/...
-
d-i
Is the slope no greater than 1:12?...
-
4a.
Is the slope no greater than 1:12?...
