Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
Search Results "Extended Floor Surface"
-
11B-306.3.2 Maximum depth
-
Clear Floor Space [4.35.2]
Clear Floor Space [4.35.2] Clear floor space is required for a parallel approach to the bench....
-
Access Board: Standard Roll In Shower Stalls
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
4.22.3* Clear Floor Space
The clear floor space at fixtures and controls, the accessible route, and the turning space may overlap....
-
Whitehall Mfg. WH2105BAR Bariatric Toilet Siphon Jet Type Off-Floor
14 gage 304 stainless steel off-floor Siphon Jet toilet features reinforced housing to withstand up to 1,000 lbs with optional carrier....
-
Willoughby Industries ETW-1490-FM-HC Floor Mounted Blowout Series Water Closet
The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish....
-
Figure M4: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and M304 Diagnostic Equipment for Use by a Patient in a Standing Position (Weight Scale Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. The weight scale is usable by both people who are...
-
Ramp Requirements [§405]
Ramp Requirements [§405]
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
10. Clear Floor Space
Is there clear floor space in each accessible guestroom bathroom where persons who use wheelchairs can turn around - either a 60" diameter circle or a "T"-turn area as shown in Figure 3...
-
11B-405.9.2 Curb or barrier
mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor...
-
11B-405.9.2 Curb or barrier
A curb or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground...
-
Besam SW200i Surface Mounted Swing Door Operator
Besam SW200i surface mounted swing door operator - flexibility to meet any need The Besam SW200i surface mounted pedestrian swing door operator features an intelligent and flexible design...
-
(d) Outside surface at entry door
The final Guidelines also provide that at the primary entry door to a dwelling units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete...
-
4.34.6.2 CLEAR FLOOR SPACE
A clear floor space at least 30 in by 48 in (760 mm by 1220 mm) complying with 4.2.4 that allows either a forward or a parallel approach by a person in a wheelchair shall be provided at...
-
How to Clean AirPods Mesh Safely Without Damaging Them?
Use a soft, dry, lint-free cloth to wipe the surface, then gently loosen debris from the mesh with a clean, dry, soft-bristled brush....
-
Energy Requirements for Different Surfaces
Energy Requirements for Different Surfaces The energy consumption results are shown in the following table and figures. Table 4....
-
Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
NFPA and ASTM safety standards recommend that identification be posted on Exit doors leading to a staircase SetonGLo Custom 6"W x 6"H photoluminescent signs identify stairs and floor...
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character. ...
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
it never needs recalibration – which saves many thousands of dollars over the life of the instrument; the only profiler that instantly produces reports, graphs, line surveys and 3D surface...
-
AJW Architectural Products U674 C-fold/Multifold Towel Dispenser & Waste Receptacle Combination w/ Extended Waste - Recessed
Door: Assembly is fabricated of #22 gauge stainless steel with a #4 satin finish on all exposed surfaces....
-
Whitehall Mfg. Ligature Resistant Solid Surface Basin
Model Number: WH3775 Features: Counter, back splash, sloped side splash and basin is constructed of Corterra, recycled solid-surface polymer resin; Default Corterra color: Blanco (other...
