For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors....
Search Results "Door Maneuvering Clearance"
-
DORMA 8000 Series Exit Device
-
II. Statutory and Regulatory Background
and construct covered multifamily dwellings so that: (1) Public use and common use portions of the dwellings are readily accessible to and usable by persons with handicaps; (2) All doors...
-
Allegion Von Duprin 33A/35A Series Exit Devices
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1....
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations....
-
TownSteel TS8000 Grade 2 Fire Rim Device
SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48"...
-
Allegion Falcon 2390 Series Recessed Exit Device
The best available recessed concealed device for stile and rail doors....
-
11B-1002.4.4 Clearances
Clearances for wheelchair spaces shall comply with Section 11B-1002.4.4. Exceptions: 1. ...
-
11B-1002.4.4 Clearances
Clearances for wheelchair spaces shall comply with Section 11B-1002.4.4. Exceptions: 1....
-
11B-604.9.2 Clearance
11B-604.9.2 Clearance. Clearance around a water closet shall comply with Section 11B-604.3....
-
Road Closure Drawings
Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-604.3 Clearance
11B-604.3 Clearance. Clearances around water closets and in toilet compartments shall comply with Section 11B-604.3....
-
PRL Glass Systems Inc. Panic Device PL-100 Series
These panic are a contemporary design offered primarily for all Glass Door/Entrance Systems with a minimal latch mechanism....
-
Yale 1500 Series Traditional Exit Devices
Lever, knob, handle and pull trim designs offer variety and permit hardware balance throughout a building 2-point hex-key dogging for standard devices allows quiet push-pull door...
-
TownSteel ED5500F Grade 1 Fire Rim Device
SPECIFICATIONS Application For single or double door with or without mullion Door Thickness 1-3/4" standard Backset 2-3/4" Device Length 36" for 2'6' to 3' wide openings 48" for...
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Allegion Falcon 1790 Series Exit Devices
standard, except EL where must use hold back feature Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: 30", 36", 42", and 48" Doors...
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
Elevator Doors
Section 407.3.1 recognizes acceptable types of elevator doors. The proposed rule recognized horizontal sliding doors....
