- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
Search Results "Door Maneuvering Clearance"
Filters
Commonly Searched Documents
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
711.4.6 Floor fire doors
Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
-
Figure 407.4.1(b) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(e) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(d) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(c) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(a) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
16. Opening Building Doors
For paratransit services, a passenger's request for the driver to open an exterior entry door to a building to provide boarding and/or alighting assistance to a passenger with a disability...
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-233.3.1.2.6 Public housing facility site impracticality
ETA Editor's Note This section of the 2019 California Building Code was amended by the Division of the State Architect. The requirements in this section were previously found in...
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
2.3.4 Analysis of Door Use Difficulty
2.3.4 Analysis of Door Use Difficulty The measurement of door use performance was designed as a quasi-experimental study that involved systematically observing and coding WhMD user performance...
-
4.1.6(3)(d) Doors
(d) Doors:...
-
§ 38.107(a)(3)
(3) A grab bar at least 24 inches long shall be mounted behind the water closet, and a horizontal grab bar at least 40 inches long shall be mounted on at least one side wall, with...
-
804.6.5.2 Bottom-Hinged Door Ovens
804.6.5.2 Bottom-Hinged Door Ovens. Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
-
804.6.5.1 Side-Hinged Door Ovens
804.6.5.1 Side-Hinged Door Ovens. Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
