Landings must be a minimum of 36 inches in width and 60 inches in length. The sloped entry may be a maximum of 30 feet at 1:12 (8.33%) slope before an intermediate landing is required....
Search Results "Clear Tread Width"
Filters
Commonly Searched Documents
-
Submerged Depth
-
5.3.3 Transfer Sides Recommendations for M302
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Edge Protection
Recommendation: At narrow routes in particular, consider maintenance of adjacent surfaces as raised or flush or wider route widths in consideration of minimum maneuvering and passage requirements...
-
Floor Plan of Elevator Cars [4.10.9]
In alterations, smaller car sizes (minimum 47 inch width and 69 inch length) are permitted in cases of technical infeasibility, including where limited by existing shaft configurations (...
-
Shape and Diameter
A gripping surface width between 1¼ to 1½ inches diameter is specified....
-
1.1.12 Ramp cross slope
slope of ramps by establishing elevations at the extreme edges of the ramp at the top and bottom of the ramp and calculate the cross slope at these two locations using the horizontal ramp width...
-
AJW Architectural Products U701 Series Frameless Mirror
General Specification Mirror: 1/4" thick type 1 transparent flat type, class 1 - clear glass mirrors....
-
HEWI System 100 Door Hardware
System 100 enables clear, reduced interior design and offers formal continuity from the door through to the bathroom....
-
HEWI Range 260 Door Hardware
A clear style marked by ergonomic objectivity defines Range 260. The flat, elliptical shape of the lever handle affords a high level of gripping comfort....
-
Texas Department of Licensing and Regulation (TDLR)
regulating in a fair, open, and consistent manner; Provide more opportunities and avenues for our customers and employees to be heard (Your Voice Matters); Deliver simple, clear...
-
Salsbury Industries Recessed Mounted Cell Phone Storage Locker 7 Door High Unit Resettable Combination Locks
(6-1/2" W x 5-1/4" H) and larger "B" size doors (13" W x 5-1/4" H) Available in 5" and 8" deep compartments Rough opening for recessed mounted units is 2 1/4" less than the unit's width...
-
Turnstile Security Systems Inc. 6000 GB 2 Optical Turnstile
Standard Equipment and Materials: 304 stainless steel, brush finish (standard) 316 stainless steel, brush finish (optional) Clear polycarbonate barrier (standard) Tempered glass...
-
Salsbury Industries Recessed Mounted Cell Phone Storage Locker 5 Door High Unit
(6-1/2" W x 5-1/4" H) and larger "B" size doors (13" W x 5-1/4" H) Available in 5" and 8" deep compartments Rough opening for recessed mounted units is 2 1/4" less than the unit's width...
-
Salsbury Industries Recessed Mounted Cell Phone Storage Locker 7 Door High Unit Master Keyed Locks
(6-1/2" W x 5-1/4" H) and larger "B" size doors (13" W x 5-1/4" H) Available in 5" and 8" deep compartments Rough opening for recessed mounted units is 2 1/4" less than the unit's width...
-
Salsbury Industries Recessed Mounted Cell Phone Storage Locker 7 Door High Unit
(6-1/2" W x 5-1/4" H) and larger "B" size doors (13" W x 5-1/4" H) Available in 5" and 8" deep compartments Rough opening for recessed mounted units is 2 1/4" less than the unit's width...
-
Turnstile Security Systems Inc. 6000 GB 1 Optical Turnstile
Standard Equipment and Materials: 304 stainless steel, brush finish (standard) 316 stainless steel, brush finish (optional) Clear polycarbonate barrier (standard) Tempered glass...
-
309 Operable Parts
Specifications for operable parts address clear floor space, height, and operating characteristics. Operable parts are required to be located with the reach ranges specified in 308....
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Question 10
Is the accessible entrance into the building free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the latch side of the door...
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
H6
If the entry has a vestibule, is there a 30-inch by 48-inch clear floor space inside the vestibule where a wheelchair or scooter user can be outside the door swing?...
-
Lavatories and Mirrors [4.19]
In those few toilet or bathrooms permitted to be adaptable, base cabinetry is allowed as long as required clear floor space and knee and toe clearances are available when the cabinet is...
