Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
Search Results "Visible Signal (Elevator Landing)"
Commonly Searched Documents
- PEMKO 2" Floor Plates/Safety Treads No. E197
- Armor-Tile Tactile Systems Cast In Place Detectable Warning Surface System
-
Mezzanine
Mezzanines have sufficient elevation that space for human occupancy can be provided on the floor below....
-
106.5.38 Mezzanine
Mezzanines have sufficient elevation that space for human occupancy can be provided on the floor below....
-
ACCESSIBILITY STANDARDS {35.151}
Uniform Federal Accessibility Standards (UFAS) or Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (ADAAG) {Not including the elevator...
-
4.3.3 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
2.7 Tread Obstacles
Where the surface is paved or is elevated above the natural ground, obstacles shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point. ...
-
4.3.3 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
Alterations to Existing Facilities
For example, if an alteration project involves only installing pedestrian signals at existing intersections and there are no detectable warning surfaces on the curb ramps at the intersections...
-
Design parameter considerations
content creation and adaptation, authored by museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals...
- Slope : Intercept
-
Bobrick Recessed Heavy-Duty Soap Dish and Bar B-4390 Section and Elevation
Requires the Premium User plan or above. (Login or upgrade your account!)
-
R302.6.1 Pedestrian Street Crossings Without Yield or Stop Control
Pedestrian street crossings without yield or stop control are crossings where there is no yield or stop sign, or where there is a traffic signal that is designed for the green phase....
-
Governmental Units Affected (R306 Pedestrian Street Crossings) (Section-by-Section Analysis)
Governmental Units Affected (Section-by-Section Analysis) The requirement for pedestrian activated signals at roundabouts with multi-lane pedestrian street crossings will affect state...
-
11B-206.2.8 Employee work areas
Large pieces of equipment, such as electric turbines or water pumping apparatus, may have stairs and elevated walkways used for overseeing or monitoring purposes which are physically part...
-
Mezzanine
Mezzanines have sufficient elevation that space for human occupancy can be provided on the floor below....
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
-
7.4.6 Tread Obstacles
Where the trail surface is paved or is elevated above the natural ground, tread obstacles shall not exceed ½ inch (13 mm) in height measured vertically to the highest point. ...
-
4.4.5 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
5.1.8 Slope
Exception: When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
-
I. Ensuring Compliance Now and In the Future
But public entities can use their authority under zoning and land use laws, as well as plan review processes, to ensure that private developers comply with the accessibility requirements...
- BEA Inc. MS11 Touchless Door Access (Wave to Open)
- Harris Communications Inc. ADA Compliant Guest Room Kit 500A Hard Case