Where five to twenty-five total EVCS are provided, one van accessible EVCS shall be identified by an ISA complying with Section 11B-703.7.2.1....
Search Results "Accessibility Requirement"
-
11B-812.8.2 Five to twenty-five
-
Boat Slips: ADA Standard Section 1003.2.1
Where the total length of a gangway or series of gangways serving as part of a required accessible route is 80 feet (24 m) minimum, gangways shall not be required to comply with 405.2....
-
11B-1003.2.1 Boat slips
Where the total length of a gangway or series of gangways serving as part of a required accessible route is 80 feet (24384 mm) minimum, gangways shall not be required to comply with Section...
-
11B-1003.2.1 Boat slips
Where the total length of a gangway or series of gangways serving as part of a required accessible route is 80 feet (24384 mm) minimum, gangways shall not be required to comply with Section...
-
11B-233.3.4.2 Alterations to individual residential dwelling units
Residential dwelling units required to comply with Sections 11B-233.3.1.1 and 11B-233.3.1.2 shall be on an accessible route as required by Section 11B-206....
-
UFAS vs. ADAAG Comparison - Assembly Seating
- Assembly Seating Click here to view/download pdf version (36 KB) Capacity of Seating & (in) Assembly Areas Combined Standards Number of Required...
-
ADA Title II: State and Local Government Activities
State and local governments are required to follow specific architectural standards in the new construction and alteration of their buildings....
-
11B-206.7.2 Wheelchair spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and...
-
11B-206.7.2 Wheelchair spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and...
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
Communication Access
These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
-
1009.2 Continuity and components
Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components: Accessible routes complying with Chapter...
-
The A11Y Project
The A11Y Project is a community-driven effort to make web accessibility easier. ...
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep...
-
Trailheads
If elements, spaces, or outdoor constructed features are altered at trailheads but the path of travel isn't changed, an outdoor recreation access route isn't required....
-
III. DISCUSSION
II of the Americans with Disabilities Act (“ADA”), programs, activities, and facilities covered by Section 504 of the Rehabilitation Act of 1973 (“Section 504”), and are subject to the access...
-
2.10.2 Gate Hardware
Gate hardware shall comply with operable controls requirements in ABAAS section 309.4 and 404.2.7....
-
Question 10
Is the accessible entrance into the building free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the latch side of the door...
-
4.30.7(4)
In assembly areas where permanently installed assistive listening systems are required by 4.1.3(19)(b) the availability of such systems shall be identified with signage that includes the...
-
Hussey Seating Company Armless Chair
customize a solution for any sports and entertainment venue — including innovative features to keep your facility compliant with all ADA, state and local regulations regarding special-needs access...
-
II. Rulemaking History
In 1998, the Access Board and DOT issued a joint final rule amending their respective existing transportation vehicle guidelines and standards to include accessibility requirements for OTRBs...
-
B. Survey, Compliance and Review of Polling Place Locations
In fulfilling the requirements of this Agreement, the Board will continue to engage EFE or some other third-party expert acceptable to both the Parties (either of which may be referred...
