In the final rule, the Board has clarified these specifications and provided more detail on their location depending on whether the shower is equipped with a seat....
Search Results "Seat Height"
Filters
Commonly Searched Documents
-
Specifications for Alternate Roll-in Shower Controls
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
Accessible Theater Style
Aisle chairs can be removed in rows dispersed throughout the room to allow seating choices for people who use mobility devices or service animals....
-
Lines of Sight for Wheelchair Spaces
Horizontal dispersion is not required in assembly areas with 300 seats or less where wheelchair spaces and companion seats are provided in the center sections of a row (the second or third...
-
§100.303(b)
(b) The following examples illustrate the application of paragraph (a) of this section: Example (1): John and Mary apply for housing at the Vista Heights apartment complex which is an...
-
3.3.15.2 Side (lateral) reach - unobstructed
reach - unobstructed For WhMD users in our study that could perform a reach task, over 90% of each of the WhMD user groups could reach beyond the lateral most point of their WhMDs for heights...
-
M305.3.2.1 Horizontal Position
The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
§ 1194.25(j)(2)
(2) Where any operable control is 10 inches or less behind the reference plane, the height shall be 54 inches maximum and 15 inches minimum above the floor....
-
704.6 Structural stability
The wall shall extend to the height required by Section 704.11 and shall have sufficient structural stability such that it will remain in place for the duration of time indicated by the...
-
12. Staff
.: installing bathtub seats, lowering adjustable shower wands, placing folding seats in transfer showers in the down position, installing auxiliary fire alarm strobes into the building alarm...
-
233.4.2
233.4.2 Facilities with more than 50 beds covered that provide common use bathing facilities shall provide at least one roll-in shower with a seat that complies with section 608....
-
11B-608.5.1 Reserved
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...
-
§ 37.167(j)(4)
(4) In all signage designating priority seating areas for elderly persons and persons with disabilities, or designating wheelchair securement areas, the entity shall include language informing...
-
§ 38.95(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section; sufficient clearances to permit a wheelchair or mobility aid user to reach a seating location;...
-
Landscape Forms Inc. Presidio Bench Collection
Seats: 5/8in. solid metal rod welded to tubular steel frames Backed or backless Backed seats on curved runs may face inside or outside the circle Optional tubular steel arms...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1003.2.12.2 Opening limitations
Open guards shall have balusters or ornamental patterns such that a 4-inch-diameter (102mm) sphere cannot pass through any opening up to a height of 34 inches (864mm)....
-
1.3.2 Focus Following NPRM Comments
This review identified four major issue areas for the MDE Advisory Committee to address, as follows: Transfer surface height and size Permitted obstructions to the transfer surface...
-
T502.4 Doorways with Steps on Over-the-Road Buses
The door opening clear width above a height of 48 inches (1220 mm) measured from the lowest step tread shall be permitted to taper so as to reduce in width to 18 inches (457 mm) minimum....
-
Tactile wayfinding
A Braille trail has a rope at waist height for a person with vision loss to follow and Braille labels for information....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
-
II. Terms of Agreement
Such renovation may include the removal of the second-row seating presently in place if feasible....
