SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability....
Search Results "Maximum Reach Depth"
-
Sargent 8200 Lever Lock
-
TownSteel TDG129 Door Guard
SPECIFICATION Material Zinc alloy plated to match finish Maximum Door Opening 4" when engaged Door Angle Protector Included with screws Door Guard Shim Come with standard package...
-
Pressalit Care PLUS Support Arm Fixed Height Swing Grab Bar
Maximum load: 330lbs. (150 kg)...
-
Delta Single Handle Pull-Down Bar/Prep Faucet with Touch2O Technology 9959T-DST
Touch-Clean spray holes allow for easy removal of hard water build-up 1 or 3-hole 8 in. installation High-arc pull-down spout swivels 360° 62 in. long hose provides outstanding reach...
-
SafePath VulcanLanding™ Rubber Transition Ramp
Without a level-landing or a maneuverable clearance area, a person in a wheelchair would otherwise roll backwards as they attempt to reach for the door hardware....
-
704.2.1.2 Forward Approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....
-
R403.4 Operation
The force required to activate operable parts shall be 22 N (5 lbs) maximum....
-
T304.3 Location
Operable parts provided at a wheelchair space shall be located adjacent to the wheelchair space 24 inches (610 mm) minimum and 36 inches (915 mm) maximum from the rear of the wheelchair...
-
T702.6 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
407.6 Operation
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....
-
407.9 Operation
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....
-
Incidental Rooms and Spaces
These can include work areas such as equipment control rooms, projection booths, radio and news booths, press boxes, and other occupiable spaces of incidental use where the maximum occupancy...
-
11B-604.9.3 Height
The height of water closets shall be 11 inches (279 mm) minimum and 17 inches (432 mm) maximum measured to the top of the seat....
-
11B-706.4 Sound pressure level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers....
-
11B-703.5.8 Character spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
704.2.1.1 Parallel Approach
Where a parallel approach is provided, the distance from the edge of the telephone enclosure to the face of the telephone unit shall be 10 inches (255 mm) maximum....
