[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
Commonly Searched Documents
-
11B-404.2.5 Thresholds
-
Section 4.26.4
• Section 4.26.4 of the 1991 Standards requires handrail gripping surfaces to have edges with a minimum radius of 1/8 inch....
-
§ 36.304(d)(2) Safe harbor
Elements in existing facilities that are not altered after [insert effective date of final rule], and that comply with the 1991 Standards, are not required to be modified in order to comply...
-
Barriers to People with Disabilities
Barriers to People with Disabilities - characteristics of spaces, elements, or services covered under the ADA Regulations or ADA Standards for New Construction that do not comply with those...
-
35. Nonacademic services
Section 104.47 establishes nondiscrimination standards for physical education and athletics counseling and placement services, and social organizations....
-
Bus boarding and alighting areas, BRT vehicles and stops/stations
ADA standards apply to buses and bus boarding and alighting areas as well as BRT vehicles and stops/stations. (DOT ADA Regulation 49 C.F.R....
-
V. REMEDIAL ACTIONS
Telecommunication Services at the SCDC Facilities....
-
102 Dimensions for Adults and Children
102 Dimensions for Adults and Children Section 2.1 of the 1991 Standards stated that the specifications were based upon adult dimensions and anthropometrics....
-
406.1 General
Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non-proprietary formats....
-
2.1.1
In most cases, it is best to refer to industry standard tolerances or other industry documents when they exist....
-
16(a)(vii)
(vii) Any non-valet parking facilities owned or operated by the hotel have the number of accessible car and van-accessible parking spaces required by the ADA Standards and comply with the...
-
§ 35.151(c)(1)
construction or alterations commence after July 26, 1992, but prior to September 15, 2010, then new construction and alterations subject to this section must comply with either UFAS or the 1991 Standards...
- Symmons Ultra-Sense Battery Powered Sensor Faucet S-6060
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
A4.) In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when...
-
Location of Accessible Routes
The 2010 Standards require all accessible routes to coincide with or be located in the same general area as general circulation paths....
- The Division on Career Development and Transition (DCDT)
-
Negotiations Between the Senate and the White House
Staff from the office of Senator John McCain (R-AZ) joined the discussion regarding telecommunications provisions and were pivotal in shaping that portion of the bill....
-
a. Structural Strength
Industry must follow testing parameters found in other standards.”...
-
11B-224.5 Dispersion
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Places of lodging. ...
-
11B-224.5 Dispersion
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Places of lodging. ...
-
11B-224.5 Dispersion
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: §36.406(c) Places of lodging. ...
-
§ 36.406(c) Places of lodging.
Places of lodging subject to this part shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the requirements for transient...
-
§35.103(a)
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 or the regulations...
-
§ 35.103(a) Rule of interpretation
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 or the regulations...