The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
Search Results "Surface Material"
Filters
Commonly Searched Documents
-
1008.3.1.2 Height
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
1008.2.5.3.2 Handrail Height
The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
R305.1.4 Size
Detectable warning surfaces shall extend 610 mm (2.0 ft) minimum in the direction of pedestrian travel....
-
705.1.3 Contrast
Detectable warning surfaces shall contrast visually with adjacent walking surfaces either light-on-dark, or dark-on-light. Figure 705.1 Size and Spacing of Truncated Domes...
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
Pilot Rock BR102 Bollard Bike Rack
Specifications: MATERIALS: Durable steel fabrication: 4-1/2” OD x 10 ga. wall central post, 1-1/2” OD steel tube bike loops, 1/4” x 8” base plate, all welded fabrication....
-
Landscape Forms Inc. Arcata Collection Benches
Refer to materials/colors link on this page to view standard selections. Arcata bench is 74" long and is available backed or backless. The backed bench is available with arms....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
407.3.1 Identification
Where provided, key surfaces outside active areas of the display screen shall be raised above surrounding surfaces....
-
Shared Streets
States, are used as detectable warning surfaces on curb ramps and blended transitions to indicate the boundary between the pedestrian route and the vehicular route at pedestrian street...
-
Soiltac Powder Mix-In
Soiltac Powder Mix-in is applied to the surface with a spreader, tilled, smoothed, and then compacted. It is then sprayed to seal the surface....
-
Sales Counters
Exception 1 indicates that sales and service counters, which are addressed in section 227 (Sales and Service), are not required to comply with the requirements for dining and work surfaces...
-
R305.2.5 Pedestrian At-Grade Rail Crossings
At pedestrian at-grade rail crossings not located within a street or highway, detectable warning surfaces shall be placed on each side of the rail crossing....
-
1009.3 Sloped Entries
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
382.121 What mobility aids and other assistive devices may passengers with a disability bring into the aircraft cabin?
., syringes, auto-injectors), as long as they comply with applicable safety, security and hazardous materials rules....
-
11B-1009.3 Sloped entries
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
Verify Rough Plumbing
VERIFY ROUGH PLUMBING – remember finish material thicknesses!...
