Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces....
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
505.4 Height
-
6.3(3)
(3) Each two-bed room shall have a minimum clear floor space of 42 in (1065 mm), preferably 48 in (1220 mm), between the foot of the bed and the wall; 36 in (915 mm) between the side of...
-
11B-804.3.2 Height
Exception: A counter that is adjustable to provide a kitchen work surface at variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted....
-
M303.2.6 Edge Protection
Where wheelchair spaces are provided on a platform raised more than 1 ½ inches (38 mm) in height, edge protection 2 inches (51 mm) high minimum measured from the surface of the platform...
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep...
-
11B-804.3.2 Height
Exception: A counter that is adjustable to provide a kitchen work surface at variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted....
-
Doorways without Doors or Gates, Sliding Doors, and Folding Doors: ADA Standard Section 404.2.4.2
Section 404.2.4.2 covers the current ADA Standards for maneuvering clearances at doorways without doors or gates, sliding doors, and folding doors.
-
Check-Out Aisles: ADA Standard Section 227.2
Section 227.2 covers scoping requirements in the current ADA Standards for check-out aisles.
-
Miniature Golf Course Configuration: ADA Standard Section 239.3
Section 239.3 covers scoping requirements in the current ADA Standards for miniature golf course configuration.
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-221.4 Designated aisle seats
Only when all seats on Aisle A would not meet the five percent minimum would seats on Aisle B be designated. ◼...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
TABLE 11B-404.2.4.2 MANEUVERING CLEARANCES AT DOORWAYS WITHOUT DOORS OR GATES, MANUAL SLIDING DOORS, AND MANUAL FOLDING DOORS MINIMUM MANEUVERING CLEARANCE...
-
11B-235.2.1 Dispersion
Where the minimum number of boat slips required to comply with Section 11B-1003.3.1 has been met, no further dispersion shall be required. Advisory 11B-235.2.1 Dispersion....
-
11B-239.3 Miniature golf course configuration
Where only the minimum 50 percent of the holes are accessible, an accessible route from the last accessible hole to the course exit or entrance must not require travel back through other...
-
11B-606.3 Height
In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted where rough-in plumbing...
-
11B-233.3.4 Alterations
residential dwelling unit, the entity shall be permitted to alter or construct a comparable residential dwelling unit to comply with Sections 11B-809.2 through 11B-809.4 provided that the minimum...
-
Bradley OmniDeck with Oval Multipurpose Basin LD3010-HS-TO1
Ready for installation, no fabrication required on-site Standard or custom dimensions to fit any application Flat bottom design maximizes basin capacity for general handwashing or...
-
Bradley OmniDeck with Rectangular Multipurpose Basin LD3010-HS-TR1
Ready for installation, no fabrication required on-site Standard or custom dimensions to fit any application Flat bottom design maximizes basin capacity for general handwashing or...
-
TrueForm 30" ADA Floating Concrete Sink Wood Edge FLO-30W-ADA
Concrete Sink meets ADA Accessibility Guidelines Dimensions: 30"L x 21"W x 5"H This floating concrete sink takes on the beautiful detail of a wood grained edge and yet still maintains...
-
Bradley OmniDeck with Square Multipurpose Basin LD3010-HS-TS1
Ready for installation, no fabrication required on-site Standard or custom dimensions to fit any application Flat bottom design maximizes basin capacity for general handwashing or...
-
Transfer Protocols
The maximum and minimum transfer heights that were attainable were recorded....
-
GE® 30" Drop-In Electric Range JDS28DFWW
Content Weights and Dimensions Approximate Shipping Weight 136 lb Cabinet Opening 30 in Cabinet Width 30 in...
-
Bradley Diplomat Foam Soap Dispenser 6A01-11
Installation Verify all rough-in dimensions prior to installation. Secure separate mounting bracket with mounting screws (included) at holes provided. Unlock the cover....
