When one or more shower stalls are provided within the same dwelling units, at least one shower stall shall comply with one of the following requirements....
Search Results "Stall Urinal"
-
1134A.6, Item 1
-
4.23.4 WATER CLOSETS
If toilet stalls are provided, then at least one shall comply with 4.17; its water closet shall comply with 4.16....
-
4.22.4 WATER CLOSETS
If toilet stalls are provided, then at least one shall comply with 4.17; its water closet shall comply with 4.16....
-
7(2)(a)(iii)
(iii) If the shower stall is the only bathing facility provided in the covered dwelling unit, or on the accessible level of a covered multistory unit, the shower stall measures at least...
-
Error/Omission: When a transfer shower is used, it is often larger than the required 36" x 36" size.
Except as specified in 9.1.2, shower stall size and clear floor space shall comply with Fig. 35(a) or (b). The shower stall in Fig. 35(a) shall be 36 in by 36 in (915 mm by 915 mm)....
-
11B-809.10.6.4 Reinforcement for grab bars
Glass-walled shower stalls shall provide reinforcement for installation of floor-mounted or ceiling-mounted grab bars....
-
11B-809.10.6.4 Reinforcement for grab bars
Glass-walled shower stalls shall provide reinforcement for installation of floor-mounted or ceiling-mounted grab bars....
-
H16
Is the toilet stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
11B-502.4 Floor or ground surfaces
Where two parking stalls share the same access aisle, a full depth aisle is required; in diagonal parking, the geometric layout will require additional access aisle depth to satisfy the...
-
11B-502.4 Floor or ground surfaces
Where two parking stalls share the same access aisle, a full depth aisle is required; in diagonal parking, the geometric layout will require additional access aisle depth to satisfy the...
-
4.17.4 Toe Clearances
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.21.7 CURBS
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
4.17.4 TOE CLEARANCES
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.21.7 Curbs
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
11B-213.3.1 Toilet compartments
Where toilet compartments are provided, at least five percent of the toilet compartments, or five percent of the combination of toilet compartments and urinals, but no fewer than one toilet...
-
Toilet Compartments: ADA Standard Section 213.3.1
Section 213.3.1 covers scoping requirements in the current ADA Standards for toilet compartments.
-
11B-809.10.6.1 Size
When one or more shower stalls are provided within the same dwelling unit, as least one shower stall shall comply with one of the following: A transfer type shower compartment...
-
G. Compartment Size
If the accessible toilet is in a stall, does the stall measure at least 60" wide and 56" deep if it is wall mounted or 59" deep if it is floor mounted to allow persons who use wheelchairs...
-
Pilot Rock BS Series Bike Stand
BS Series Bike Stands provide stalls on 16” centers (on same side) to fit most bicycles. Model BS-3SS: 2 ft.-10 in. long, parks 3 bikes, using one side....
-
H15
Is at least one wide toilet stall provided with an out swinging door, side and rear grab bars, and clear space next to the toilet?...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36....
