11B-608.2.2 Standard roll-in type shower compartments. Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear...
Search Results "Element"
2010 ADA Definition
Element: An architectural or mechanical component of a building, facility, space, or site.
-
11B-608.2.2 Standard roll-in type shower compartments
-
11B-608.2.1 Reserved
11B-608.2.1 Reserved. ETA Editor's Note The transfer type shower compartments prescribed by 2010 ADAS 608.2.1 are not recognized as an accessible shower in California.
-
11B-213.3.2 Water closets
Where water closets are provided, at least five percent but no fewer than one shall comply with Section 11B-604. [S.H. 11B-213.3.2] [2010 ADAS] 213.3.2 Water Closets. Where water...
-
6) Water fountains
6) Water fountains ADAAG: Where there is more than one fountain on a floor, 50% must be accessible to persons using wheelchairs. If there is only one drinking fountain on a floor,...
-
11B-608 Shower compartments
[See subsections ...]
-
11B-608.1 General
Shower compartments shall comply with Section 11B-608. Advisory 11B-608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a...
-
11B-606 Lavatories and sinks
[See subsections ...]
-
11B-213.3.2 Water closets
Where water closets are provided, at least 5 percent but no fewer tan one shall comply with Section 11B-604. [2010 ADA Standards] 213.3.2 Water Closets. Where water closets are...
-
11B-608.2 Size and clearances for shower compartments
Shower compartments shall have sizes and clearances complying with Section 11B-608.2.
-
11B-608.2.1 Transfer type shower compartments
Transfer type shower compartments shall be 36 inches (914 mm) by 36 inches (914 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch...
-
608.1 General
608.1 General. Shower compartments shall comply with 608. Advisory 608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of...
-
211 Drinking Fountains
211 Drinking Fountains
-
606 Lavatories and Sinks
606 Lavatories and Sinks
-
608.2.2 Standard Roll-In Type Shower Compartments
608.2.2 Standard Roll-In Type Shower Compartments. Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside...
-
213.3.2 Water Closets
Where water closets are provided, at least one shall comply with 604.
-
608.2 Size and Clearances for Shower Compartments
608.2 Size and Clearances for Shower Compartments. Shower compartments shall have sizes and clearances complying with 608.2.
-
608 Shower Compartments
[See subsections ...]
-
608.2 Size and Clearances for Shower Compartments
Shower compartments shall have sizes and clearances complying with 608.2.
-
606 Lavatories and Sinks
[See subsections ...]
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
213.3.2 Water Closets
213.3.2 Water Closets. Where water closets are provided, at least one shall comply with 604.