The seat shall be 16 inches (405 mm) wide minimum.
Search Results "Ceiling Mounted Patient Lift"
Filters
Commonly Searched Documents
-
Seat Width: ADA Standard Section 1009.2.5
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum.
-
BraunAbility Millenium 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
The Millennium 2 Wheelchair Lift is the true workhorse of the BraunAbility Commercial line....
-
11B-213.2.2 Unisex (Patient) toilet rooms in medical care and long-term care facilities
Common-use unisex toilet rooms for exclusive patient use not located within patient bedrooms shall contain a lavatory and one water closet....
-
Figure 1009.2.3 Clear Deck Space at Pool Lifts – Drawing from the U.S. Access Board
-
BraunAbility Vista 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
The Vista 2 Wheelchair Lift offers standard BraunAbility safety, quality, reliability, and durability in a unique stacking platform that does not block driver and passenger visibility through...
-
D. M304 Diagnostic Equipment Used by Patients in a Standing Position
M304 provides the technical requirements for diagnostic equipment used by patients in a standing position....
-
F207.2 Platform Lifts
Standby power shall be provided for platform lifts permitted by section 1003.2.13.4 of the International Building Code (2000 edition and 2001 Supplement) or section 1007.5 of the International...
-
Location and Size
Each side rail can be removed to permit patients to transfer onto and off of the table, and to permit health care personnel to perform diagnostic procedures....
-
11B-805.2 Patient bedrooms and resident sleeping rooms
Patient bedrooms and resident sleeping rooms required to provide mobility features shall comply with Section 11B-805.2....
-
4.4.1* General
Objects mounted with their leading edges at or below 27 in (685 mm) above the finished floor may protrude any amount (see Fig. 8(a) and (b))....
-
4.4.1* GENERAL
Objects mounted with their leading edges at or below 27 in (685 mm) above the finished floor may protrude any amount (see Fig. 8(a) and (b))....
-
Harmar TG400 Toe Guard Commercial Platform Lift
Free-standing Toe guard VPL with stationary lower landing walls and gate shields the lift inside....
-
M304 Diagnostic Equipment Used by Patients in Standing Position (Section-by-Section Analysis)
M304 in the final rule establishes the technical criteria for diagnostic equipment used by patients in a standing position such as a weight scale or x-ray equipment that is used in a standing...
-
§ 38.159(b) Vehicle lift
(b) Vehicle lift—...
-
§ 38.125(b) Car lift
(b) Car Lift—...
-
§ 38.23(b)(1) Design load
The design load of the lift shall be at least 600 pounds....
-
§ 38.83(b)(1) Design Load
The design load of the lift shall be at least 600 pounds....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
1003.2.13.4 Platform lifts
Platform (wheelchair) lifts shall not serve as part of an accessible means of egress, except where allowed as part of a required accessible route in Section 1108.7....
-
PREFERRED COMMUNICATION: IDENTIFIES METHODS BY WHICH PATIENTS WANT TO RECEIVE COMMUNICATIONS AND INFORMATION:
PREFERRED COMMUNICATION: IDENTIFIES METHODS BY WHICH PATIENTS WANT TO RECEIVE COMMUNICATIONS AND INFORMATION:...
-
M301.2.1, M302.2.1 Transfer Height
to the uncompressed height of the patient support surface....
-
Seat Height
Seat Height The lift must be designed so that the seat will make a stop between a minimum of 16 inches and maximum of 19 inches (measured from the deck to the top of the seat surface,...
-
Cross Section of Gripping Surfaces
The Access Board is considering whether the above cross section dimensions would be appropriate for the gripping surfaces of transfer supports on diagnostic equipment used by patients in...
