704.4.1 Height. When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
Search Results "Door Height"
-
704.4.1 Height
-
TownSteel ED1300 Grade 1 Concealed Vertical Rod Panic Device
Retrofit 98/99 installation requires no additional door prep. ...
-
SDC Sure Exit® PSB560 REX Pressure Sense Exit Bar
Stable and Reliable Pressure Sense Technology Building codes essentially state that egress through access controlled doors must not require prior knowledge of operational requirements...
-
Polling place violations that can be remediated with temporary measures
Voting Area: One side of the double leaf doors to the voting area does not provide at least 32 inches clear passage width when the door is open 90 degrees (1991 ADA Stds 4.13.4, 4.13.5,...
-
11B-233.3.1.2.6 Public housing facility site impracticality
Doors complying with Section 11B-404. 3. Communication features complying with Section 11B-809.5.5. 4. ...
-
Sargent 8500 Narrow Design Rim Exit Device
Features Designed for narrow stile applications such as aluminum frame full glass doors Single and double doors with mullion Single point rim latching device...
-
Sargent 8888 Reversible Rim Exit Device
The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function....
-
HEWI Panic Bar EN 1125
Special solutions for exit doors must enable fast escape in an emergency....
-
Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
-
TownSteel TRXL Grade 1 Cylindrical Lock with Ligature Resistant Trim
It fits standard 161 door prep....
-
Height [4.27.3]
Height [4.27.3] The operable portions of controls and operating mechanisms must be within established reach ranges for either a forward or side reach as required in 4.2.5 and 4.2.6 (see...
-
Corbin Russwin Inc. ED5000 Series Exit Device
Aesthetics Over the past 100 years, Corbin Russwin has been well-known for weaving pleasing aesthetics and inventive designs into architectural door hardware, and today’s wide stile exit...
-
Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
Certifications ANSI/BHMA A156.3 Series Grade 1 UL/cUL listed (3-hours) for "A" label single door applications (4' x 8') UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Pressure...
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Allegion Falcon 1990 Series Cross Bar Exit Devices
: Hex dogging standard Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7' door...
-
DORMA 8000 Series Exit Device
For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors....
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Allegion Von Duprin 33A/35A Series Exit Devices
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1....
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
Clear Floor and Turning Space Inside Examination Rooms
Clear floor space is needed along at least one side of an adjustable height examination table....
-
TownSteel TS8000 Grade 2 Fire Rim Device
SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48"...
