have a base diameter of 23 mm (0.9 in) minimum and 36 mm (1.4 in) maximum, a top diameter of 50 percent of the base diameter minimum and 65 percent of the base diameter maximum, and a height...
Search Results "Character Height (Raised)"
-
R305.1.1 Dome Size
-
407.8.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...
-
1132A.1 Primary entry doors and required exit doors
The width and height of primary entry doors and all required exit doors shall comply with Section 1126A.1....
-
A7. Curb Ramps
[ADA Stds 4.7.2] Note: 1:12 is one inch of vertical height for each 12 inches in length. Yes _____ No _____...
-
Accessible Sports Facilities
areas for public use such as petting zoos and passageways along animal pens at fairs Bowling lanes Shooting facilities These recreation facility guidelines do not apply to: Raised...
-
Scenario 11 – Retaliation
Chen raised the issue with the principal again at a recent Parent Teacher Association meeting in front of other parents and teachers. The following week, Ms....
-
IV. Public Comments and Commenters
Although those comments were not timely filed, they were reviewed to assure that any major issues raised had been adequately addressed in comments that were received by the deadline....
-
IMPLEMENTATION AND ENFORCEMENT
If the United States believes that this Agreement or any portion of it has been violated, it will raise its concerns with the ISP and the parties will attempt to resolve those concerns in...
-
What barriers will it be "readily achievable" to remove?
sidewalks and entrances; 3) Repositioning shelves; 4) Rearranging tables, chairs, vending machines, display racks, and other furniture; 5) Repositioning telephones; 6) Adding raised...
-
"Alteration"
resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
11B-216.9.2 Directional signs
Directional signs shall comply with Section 11B-703.5 _|Signs; Visual Characters|_ and shall include the International Symbol of TTY complying with Section 11B-703.7.2.2....
- Ultratec Uniphone 1140 TTY
- Voice Dream Reader App
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
11B-405.5 Clear width
Handrails may project into the required clear width of the ramp at each side 3½ inches (89 mm) maximum at the handrail height....
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
11B-405.5 Clear width
Handrails may project into the required clear width of the ramp at each side 3½ inches (89 mm) maximum at the handrail height....
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
602 Drinking Fountains
references to water coolers (602.1) requiring all wheelchair accessible drinking fountains to provide knee and toe clearance for a forward approach (602.2) lowering the minimum height...
-
Accessible Pool Stairs
ADAAG provisions for stairs include the requirement that all steps have uniform riser heights and uniform tread widths of not less than 11 inches, measured from riser to riser....
-
809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
f-iv
Handrail height 34 to 38 inches 5. Edge protection....
-
407.12.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...