Other applicable specifications include accessible work surface heights and toe and knee clearance....
Search Results "Character Height (Raised)"
-
Accessible Courtroom Stations
-
607 Bathtubs
Changes made to this section include: revision of grab bar mounting heights (607.4) integration of provisions for grab bars specific to residential dwelling units that were...
-
4.31.2 CLEAR FLOOR OR GROUND SPACE
Figure 44 Mounting Heights and Clearances for Telephones...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
Pilot Rock WUT and WUTH Picnic Table Using Recycled Plastic
Nominal seat height is 18”. The WUTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Pilot Rock WUT and WUTH Picnic Table Using Formed Steel Channel
Nominal seat height is 18”. The WUTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Pilot Rock WXT and WXTH Picnic Table Using Lumber
Nominal seat height is 18”. The WXTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Pilot Rock WXT and WXTH Picnic Table Using Expanded Steel
Nominal seat height is 18”. The WXTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Pilot Rock WUT and WUTH Picnic Table Using Lumber
Nominal seat height is 18”. The WUTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Pilot Rock WXT and WXTH Picnic Table Using Recycled Plastic
Nominal seat height is 18”. The WXTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). ...
-
Ramps M303:3.3, 3.3.1, 3.3.2
Provision: Changes in Level at Entry to Wheelchair Spaces includes technical criteria for changes in level at the entry to a wheelchair space as may occur at wheelchair weight scales with raised...
-
1.4 Overview of Report
Section 6 briefly introduces the standard about which Committee members did not reach consensus: the minimum transfer surface height....
-
Accessible Routes to Tiered Dining Areas in Sports Facilities
The 1991 Standards, at sections 4.1.3(1) and 5.4, and section 206.2.5 of the 2010 Standards require an accessible route to be provided to all dining areas in new construction, including raised...
-
QUESTIONS AND ANSWERS: THE AMERICANS WITH DISABILITIES ACT AND HIRING POLICE OFFICERS
The following questions and answers respond to the concerns most commonly raised by police departments....
-
Employee for ADA Compliance
The designated employee(s) or consultant shall be knowledgeable about or receive training on the ADA, shall serve as the primary contact(s) on disability-related issues and concerns raised...
-
Employee for ADA Compliance
The designated employee(s) or consultant shall be knowledgeable about or receive training on the ADA, shall serve as the primary contact(s) on disability-related issues and concerns raised...
-
Employee for ADA Compliance
The designated employee(s) or consultant shall be knowledgeable about or receive training on the ADA, shall serve as the primary contact(s) on disability-related issues and concerns raised...
-
Measures and Procedures
Measures and Procedures A custom-built modular, transfer station was designed and built and consisted of a height adjustable platform capable of a range between 10” to 29” with increments...
-
809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
Alteration
, resurfacing of circulation paths or vehicular ways, changes or rearrangement of structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
R305.1.1 Dome Size
have a base diameter of 23 mm (0.9 in) minimum and 36 mm (1.4 in) maximum, a top diameter of 50 percent of the base diameter minimum and 65 percent of the base diameter maximum, and a height...
-
407.8.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...
-
1132A.1 Primary entry doors and required exit doors
The width and height of primary entry doors and all required exit doors shall comply with Section 1126A.1....
-
A7. Curb Ramps
[ADA Stds 4.7.2] Note: 1:12 is one inch of vertical height for each 12 inches in length. Yes _____ No _____...
