Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
Search Results "Character Height (Raised)"
-
11B-605.4 Flush controls
-
4.10.12(3)
(3) Height. All floor buttons shall be no higher than 54 in (1370 mm) above the finish floor for side approach and 48 in (1220 mm) for front approach....
-
Scoping [4.1.3(20)]
Specifications in 4.34.2 and 4.34.3 were modified in June 1993 to allow either a forward or side approach and to provide further guidance on side reach heights....
-
A4.13.9 Door Hardware
To be effective, they should cover the door width, less approximately 2 in (51 mm), up to a height of 16 in (405 mm) from its bottom edge and be centered across the width of the door....
-
604.5 Grab Bars
must be sufficient to permit the installation of rear and side wall grab bars that fully meet all accessibility requirements including, but not limited to, required length, installation height...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
-
11B-216.7 Elevators
comply with these building standards shall have the location of and the directions to these elevators posted in the building lobby on a sign complying with Section 11B-703.5 _|Signs; Visual Characters...
-
R213 Transit Stops and Transit Shelters
Signs that identify the routes served by the transit stop must comply with the technical requirements for visual characters on signs unless audible sign systems or other technologies are...
-
Finish and Contrast [4.30.5]
film most non-glossy types glossy metal certain satin or random brushed finishes polished or directional brushed finishes Recommendations: Light characters...
-
11B-216.7 Elevators
comply with these building standards shall have the location of and the directions to these elevators posted in the building lobby on a sign complying with Section 11B-703.5 _|Signs; Visual Characters...
-
11B-106.5 Defined terms
TELLER MACHINE (ATM) BATHROOM BLENDED TRANSITION BOARDING PIER BOAT LAUNCH RAMP BOAT SLIP BOTTLE FILLING STATION BUILDING BUILDING OFFICIAL CATCH POOL CCR CHARACTERS...
-
Jean Tessmer
Some of us prefer to mount to allow 28" knee clearance minimum to give the person in the wheelchair a lower shelf height of 32" depending on the thickness of your new #200 baby changer shelf...
-
ADA Sign Depot California Title 24 Unisex Restroom Door Sign Circle and Triangle - 12" x 12"
Item # T24-1003 Unisex Wheelchair Accessible Restroom Door Sign Title 24 compliant non-glare matte finish Tactile (1/32-inch raised) pictograms Title 24 compliant...
-
Grab Bars: ADA Standard Section 604.5
Section 604.5 covers the current ADA Standards for grab bars that are used for water closets.
-
11B-809.10.5.2 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. b....
-
11B-809.10.5.2 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. b....
-
Cybex Total Access Seated Leg Curl Exercise Machine
Raised Numbering Raised numbers and large font on ROM. Start positions are easy to adjust/identify for visually impaired and older users....
-
Cybex Total Access Overhead Press Exercise Machine
Raised Weight Stack Numbering Raised weight stack iconography for visually impaired users to identify weight stack positions....
-
Viking Electronics AES-2000 Entry System
The large .5 inch high character display shows the directory of the people in the building, and also displays directions and message prompts....
-
1134A.6, Item 4
The grab bar reinforcement shall be a minimum of 6 inches (152.4 mm) nominal in height. ...
-
1132A.4.1 Thresholds
Changes in height at interior door thresholds (e.g., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm). Thresholds shall comply with the following:...
-
1134A.6, Item 4
The grab bar reinforcement shall be a minimum of 6 inches (152.4 mm) nominal in height....
-
§ 38.153(c)(1)
(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to...
