Heavy-duty steel construction and Grade 1 performance, priced for outstanding value....
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
Corbin Russwin Inc. ED8000 Pushpad Exit Device
-
Cal-Royal CR801 Series Hydraulic Door Closers
Meeting The Highest Industry Standards, Grade 1 Heavy-Duty Double Lever Arm With Extra Smooth Action Full Feature Multi-Size Commercial Door Closer For Use In Office Buildings, Shopping...
-
WHEELCHAIR
This definition does not apply to Federal wilderness areas; wheelchairs in such areas are defined in section 508(c)(2) of the ADA, 42 U.S.C. 12207(c)(2)....
-
Addendum E: Comparison of participants tested at the National Disabled Veterans Winter Sports Clinic (NDVWSC) compared to the participants tested at the Human Engineering Research Laboratories and Hiram G. Andrews Center
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). ...
-
Sample Action Plan
Develop list of places to request in-person and video-relay interpreters. 2. Send list to staff and committees. 3....
-
301.1 Scope
The requirements of Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other...
-
Shelves for Portable TTYs: ADA Standard Section 217.5
Section 217.5 covers scoping requirements in the current ADA Standards for shelves for portable TTYs.
-
1009.6.4 Separation
Areas of refuge located within an enclosure for interior exit stairways complying with Section 1023. 2....
-
1015.3 Height
Exceptions: For occupancies in Group R-3, and within individual dwelling units in occupancies in Group R-2, guards on the open sides of stairs shall have a height not less than 34...
-
11B-809.8 Doors
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change in height between floor surfaces....
-
General Exceptions in FSTAG
In addition, if General Exception 2 applies, send notification to the U.S. Access Board....
-
New Construction
must be read in conjunction with Chapter 2 to ensure an accurate understanding of the legal requirements....
-
WorkZone Safety Products Retractable Cone Bar
Light weight and extremely portable Easy to set up or remove Providing an instant inexpensive barrier to hazardous or controlled access areas Made with high quality industrial grade...
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
All 88 series exit devices are UL listed from Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 1994, Grade 1....
-
TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
The XCE9020 is a Standalone Keypad Classroom Security function lock that provides a remote lockdown along with the security afforded by using a grade 1 heavy duty cylindrical lockset....
-
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
A 2 inch high edge protection must be provided on the back of the platform, opposite the entry ramp and a minimum 2 inch high edge protection on the sides of the platform....
-
Pushbutton-integrated APS
Pushbutton-integrated APS Figures 1 and 2 show several of the pushbutton-integrated APS devices that are available in the US....
-
§ 38.23(b)(6) Platform surface
The platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the platform surface to 30 inches above the...
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
§ 38.83(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.125(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.23(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2...
-
§ 38.95(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
Comparison of Transfer Protocols
Ranges Phase 1 (n=111) 22.3 25.0 27.0 29.0 29.0 20-29 Phase 2...
