The requirements of Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other...
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
301.1 Scope
-
1015.3 Height
Exceptions: For occupancies in Group R-3, and within individual dwelling units in occupancies in Group R-2, guards on the open sides of stairs shall have a height not less than 34...
-
11B-809.8 Doors
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change in height between floor surfaces....
-
Shelves for Portable TTYs: ADA Standard Section 217.5
Section 217.5 covers scoping requirements in the current ADA Standards for shelves for portable TTYs.
-
1009.6.4 Separation
Areas of refuge located within an enclosure for interior exit stairways complying with Section 1023. 2....
-
General Exceptions in FSTAG
In addition, if General Exception 2 applies, send notification to the U.S. Access Board....
-
New Construction
must be read in conjunction with Chapter 2 to ensure an accurate understanding of the legal requirements....
-
Pushbutton-integrated APS
Pushbutton-integrated APS Figures 1 and 2 show several of the pushbutton-integrated APS devices that are available in the US....
-
§ 38.23(b)(6) Platform surface
The platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the platform surface to 30 inches above the...
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
§ 38.83(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.125(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
§ 38.23(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2...
-
§ 38.95(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
A 2 inch high edge protection must be provided on the back of the platform, opposite the entry ramp and a minimum 2 inch high edge protection on the sides of the platform....
-
Sargent 8200 Lever Lock
The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry....
-
Seton Directional Entrance Sign - Left Arrow
Use Accessible Entrance Signs to direct users to the nearest accessible entrance Engineer Grade reflective .063" aluminum material is equally visible day or night Extend the life...
-
Comparison of Transfer Protocols
Ranges Phase 1 (n=111) 22.3 25.0 27.0 29.0 29.0 20-29 Phase 2...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
APPENDIX A. GUIDELINES FOR SERVICE ANIMAL RELIEF AREAS (SARA)
A.2 Number. A.2.1 At least one SARA must be located in each public sterile area of each terminal....
-
701.1 Scope
The standards referenced in Chapter 7 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where referenced in any other chapter...
-
301.1 Scope
The requirements of Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other...
-
1002.1 Definitions
The following terms are defined in Chapter 2: ACCESSIBLE MEANS OF EGRESS. AREA OF REFUGE. EXIT. GUARD ([DSA-AC, HCD 1 & HCD 2] or GUARDRAIL). HANDRAIL....
