[See subsections ...]
Search Results "Door Clear Width"
-
Results
-
§ 38.107(a)(1)
(1) The minimum clear floor area shall be 35 inches by 60 inches....
-
General Partitions ADA Door Pull Kit (6300HC-SS)
(2) Door Pulls Thru-Bolted together through door Cast Stainless Steel...
-
11B-606.2 Clear floor space
11B-606.2 Clear floor space....
-
Operating Hardware
Operating Hardware Common Problem: The shape of the hardware on accessible doors, and on faucets, fixed lamps, drapery controls, and heating and air conditioning controls in spaces...
-
Forward Reach [4.2.5]
Forward reaches are measured to the edge of available clear floor space. This accommodates high and low reaches and assumes some forward bending....
-
606.2 Clear Floor Space
A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided....
-
Tobin Passage Levers Door Hardware
strength ANSI/BHMA Grade 2 security features Accessibility Code (ADA) A117.1 compliant Easy to install; adjustable backset latch fits 2-3/8" (60mm) or 2-3/4" (70mm) Accommodates door...
-
Mounting Location and Height [4.30.6]
Mounting Location and Height [4.30.6] Placement of tactile signs aside doors (latch-side) provides safety since locating signs on doors that swing out is hazardous....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
Access Board: Clear Floor or Ground Space
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
At viewing scopes used from a seated position, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the viewing scope must be provided....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
HEWI System 162 Door Hardware
System 162 includes formally matched fittings and sanitary accessories and therefore enables continuous design from the door through to the sanitary room....
-
Corbin Russwin Inc. BHSS Trim Specialty Door Hardware
Stainless Steel finishes (629, 630) standard; Microshield® antimicrobial coating optional Matching behavioral health thumbturn available UL Listed for use with Fire Rated doors...
-
BEST Door Lever Hardware Cylindrical Locks - 7KC
Cylindrical chassis to fit common door preparation. Standard and Drive-in latches available. Through-bolt mounting studs increase torque resistance....
-
Sargent AL 80 Alarmed Exit Panic Door Hardware
The AL-80 Series is ideal for rear exterior doors, doors leading to a rooftop, or anywhere security is a concern....
-
11B-809.10.7.1 Floor space
Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a...
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
1134A.8, Item 5
5. Finished floor. The finished floor beneath the lavatory shall be extended to the wall.
-
A4.33.2 Size of Wheelchair Locations
Spaces large enough for two wheelchairs allow people who are coming to a performance together to sit together.
-
A4.33.2 SIZE OF WHEELCHAIR LOCATIONS
Spaces large enough for two wheelchairs allow people who are coming to a performance together to sit together.
