Search Results "Door Clear Width"
-
Figure 404.2.4.3(b) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
-
Kawneer North America 1040 Sliding Mall Front Door
Welded Dual Moment corner construction with four Sigma deep penetration and fillet welds, and additional mechanical fastening all provide one of the strongest door constructions in the industry...
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
BEST Door Lever Hardware Cylindrical Locks - 5K
• Underwriters Laboratories®: 5K series – Listed by Underwriters Laboratories for use on 3 Hr, A label for single (4’ x 8’) doors....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
At viewing scopes used from a seated position, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the viewing scope must be provided....
-
11B-606.2 Clear floor space
11B-606.2 Clear floor space....
-
Sargent 11 Line Lever Lock
Requires the Registered User plan or above. Login! -
SDC EntryCheck® E70 Series Standalone Electronic Locksets
This video of the Entrycheck E70 series electronic lockset covers both indoor and outdoor solutions for contolled electronic entry to facilities. Video covers various installtion...
-
How to Rehand a PDQ 115 Series Mortise Lock
Instructions on rehanding a PDQ 115 Series Mortise Lock
-
Changing the Hand of a Hager Companies 3800 Mortise Lock
How to change the handing of a Hager Companies Mortise Lock
-
606.2 Clear Floor Space
A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided....
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
Hager Companies Round Wrought Door Pull 4
Round Wrought Door Pull Materials: - Aluminum, brass, bronze, stainless steel Accessible: - 2-1/2" (64 mm) Clearance available on special order. Add prefix ''H'' to number....
-
Hager Companies Round Wrought Door Pull 3
Round Wrought Door Pull Materials: - Aluminum, brass, bronze, stainless steel Accessible: - 2-1/2" (64 mm) Clearance available on special order. Add prefix ''H'' to number....
-
11B-809.10.7.1 Floor space
Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a...
-
T204.1 General
Doorways on non-rail vehicles shall comply with T204.
-
T204 Doorways
[See subsections ...]
-
T208.1 General
Non-rail vehicles shall provide passenger access routes that permit boarding and alighting, onboard circulation, and seating by passengers with disabilities. A passenger access route...
-
604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets...
-
4.1.2(5)(a)
(a) If parking spaces are provided for self-parking by employees or visitors, or both, then accessible spaces complying with 4.6 shall be provided in each such parking area in...
-
A4.6.3 Parking Spaces
The increasing use of vans with side-mounted lifts or ramps by persons with disabilities has necessitated some revisions in specifications for parking spaces and adjacent access...
-
A4.6.3 PARKING SPACES
High-top vans, which disabled people or transportation services often use, require higher clearances in parking garages than automobiles. When optional van spaces are provided within...
-
604.8.1.1 Size
604.8.1.1 Size. Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall...
